SUMMERS OPTICAL CAT#: 12670
SUMMERS PRODUCT: P-92
DATE 06/12/2006

MATERIAL SAFETY DATA SHEET
CATALYST FOR LENS BOND
The information contained herein is based on data considered accurate. However, no warranty is expressed or implied regarding the accuracy of this data or the results to be obtained from the use thereof. Summers Optical assumes no responsibility for personal injury or property damage to vendees, users or third parties caused by the material. Such vendees or users assume all risks associated with the use of the material.

Summers Optical, A Division of EMS Acquisition
1560 Industry Road - P O Box 380 - Hatfield, PA 19440
TEL: (215) 412-8380 - FAX: (215) 412-8450

24 Hour Emergency Phone # Chemtrec: 800/424-9300

FOR PRODUCT AND SALES INFORMATION
CONTACT SUMMERS OPTICALS OFFICE ABOVE

PRODUCT IDENTIFICATION

PRODUCT NAME:

  Lens Bond Optical Cement Type P-92

HAZARDOUS INGREDIENTS
 

OSHA PEL

AGGIH TLV

OTHER EXP LIMITS

% OPT
Acrylate Monomer*

N/E

N/E

N/E

N/E
Organic Di-Valent Sulfur Compound*

N/E

N/E

N/E

N/E
Photo Initiator*

N/E

N/E

N/E

N/E
* The identity of the above ingredients are being witheld as proprietary but none of the chemicals are mutagenic or carcinogenic by N.T.P. or I.A.R.C. or OSHA.

PHYSICAL AND CHEMICAL CHARACTERISTICS
BOILING POINT: N/E
MELTING POINT: 5°C
SPECIFIC GRAVITY (H2O=1): 1.1
VAPOR PRESSURE (mm Hg): N/A
VAPOR DENSITY (Air=1) : N/E
APPEARANCE/ODOR: Water white viscous liquid, sulfurous odor
SOLUBILITY IN WATER: Insoluble
REACTIVITY IN WATER: Non reactive

FIRE AND EXPLOSION HAZARD DATA

FLASH POINT:

 300°F

METHOD USED:

 P/M CC

EXPLOSION LEVEL-LOWER (LEL):
-UPPER (UEL):

 N/A
N/A

AUTO-IGNITION TEMPERATURE:

 N/A

EXTINGUISHER MEDIA:

 Carbon Dioxide, Foam, Dry Chemical

FIRE FIGHTING PROCEDURES:

 Use self-contained breathing apparatus.

UNUSUAL FIRE AND EXPLOSION HAZARDS:

 Could generate Carbon Monoxide and/or Hydrogen Sulfide.

REACTIVITY DATA

STABILITY:

 Stable

CONDITIONS TO AVOID:

 Strong Oxidizers and UV light

INCOMPATIBILITY
(MATERIALS TO AVOID):

 Strong Oxidizers

HAZARDOUS DECOMPOSITION PRODUCTS:

 None

HAZARDOUS POLYMERIZATION:

 Will not occor

CONDITIONS TO AVOID:

 Temperatures above 150°F and strong UV light.

HEALTH HAZARDS

ACUTE:

 Dermatitis, Nausea, Headaches

CHRONIC:

 Skin rash or general sensitization

SIGNS AND SYMPTOMS OF EXPOSURE:

 Reddening of the skin, shortness of breath, headaches, fainting

MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE:

 Skin allergies, asthma, bronchitis, emphysema or other respiratory disorders

CHEMICAL LISTED AS A CARCINOGEN OR POTENTIAL CARCINOGEN:

 NTP: No
IARC: No
OSHA: No

EMERGENCY AND FIRST
AID PROCEDURES:

 If material enters eyes, flush with copious amounts of water for 15 minutes and see a doctor. If material gets on skin, wash with soap and water and rinse thoroughly.

 

ROUTES OF ENTRY:

INHALATION:

 Likely: Remove to fresh air.

EYES:

 Not Likely: Flush with Plenty of water and get medical attention

SKIN:

 Most likely: wash thoroughly with soap and water and rinse thoroughly.

INGESTION:

 Least likely: Dilute with milk or water and induce vomiting in alert and responsive patients only. Not Toxic.

WOUNDS:

 Wash thoroughly with soap and water and seek medical attention.

PRECAUTION FOR SAFE HANDLING AND USE

SPILLS OR LEAKS:

 Absorb with clay or approved absorbant. Mop area with detergent and rinse.

WASTE DISPOSAL:

 Controlled incineration or cure by UV light and dispose as any other plastic.

STORAGE AND HANDLING:

 Store between 60°-85°F. Avoid strong oxidizers and UV light

OTHER PRECAUTIONS:

 Wear protective clothing when handling

ECOLOGICAL INFORMATION:

ECOTOXICOLOGICAL INFORMATION:

 N/A

CHEMICAL FATE:

 N/A

TRANSPORT INFORMATION

NOT RESTRICTIVE

REGULATORY INFORMATION

NOT APPLICABLE

Back to MSDS Menu | Back to Main Menu