Questions? 800-523-5874 | [email protected]
- Prepmaster™ Specimen Preparation Robot
- TEM Grids
- TEM Window Grids
- Omniprobe Nanomanipulation Systems
- K-kit Wet "Liquid" TEM Kit
- Specimen Mounts
- SEM Specimen Holders
- Index and Finder SEM Grids
- SEM for Forensics
- SEM Sample Preparation Station Materials
- Cryogenic Personal Protection Equipment
- Cryo Dewars & Flasks
- Cryogenic Grids & Accessories
- Cryogenic Vials & Racks
- Cooling Chambers & Ice Baths
- Prepmaster™ Specimen Preparation Robot
- Laboratory Microwave Ovens
- LYNX II Automated Tissue Processor
- EMS Poly III
- Microtomes
- Tissue Slicers
- Rapid Immersion Freezer
- Heaters & Chillers
- SEM Cooling Stage
- Glow Discharge Systems
- Sputter Coaters & Carbon Coaters
- Stages
- Freeze Dryers
- Critical Point Dryers
- Cryo-SEM Preparation System
- Specimen Transfer Systems
- Decontaminators
- Desiccators
- Centrifuges
- Dry Baths
- Stirrers, Hot Plates
- Vortexers & Magnetic Mixers
- Rotators & Rockers
- Ovens & Incubators
- Vibration Isolation
- Air Sampling
- Vacuum Pumps
EMS Technical Tips
Stability of Special Staining Solutions
General Guidelines Concerning Solutions
- Check stock solutions regularly for signs of deterioration.
- All solutions should be dated and initialed by the person who prepared the solution.
- Use caution to prevent cross solution contamination.
- Use distilled or double distilled water to prepare solutions.
- Use reagent grade chemicals.
- Use dyes which are certifie .
- Keep solutions in well stoppered bottles at all times.
- Refrigerated solutions should be poured into the staining jar, and the bottled solution returned to the refrigerator before it warms to room temperature.
- Return all staining solutions to shelves soon after use to prevent mix-up.
- Always use clean glassware.
- Make sure that balance, pH meter, etc., are in proper working order.