New Products December, 2009
Instant Hand Sanitizer (Fresh Scent)
Kill 99.99% of germs in 15 seconds without the use of soap and water. This formula evaporates completely with no rinsing required. Instant Hand Sanitizer contains aloe-vera which adds moisture with each use. Instant Hand Sanitizer is available in convenient pump dispensers, single use pouches and flip-top dispenser bottles. Our Hand Sanitizer helps you meet OSHA, APIC and CDC hand washing recommendations in the absence of soap and water. Instant Hand Sanitizer has demonstrated virucidal activity against HIV-1 and Avian Flu A in 15 seconds.
Wall Mount Bracket for 16 oz Pump Bottle
Wire bend and rubber coated bracket to hold 16 oz Fresh Scent Hand Sanitizer bottle in a convenient location for office or production areas wherever sanitizing hand needed.
| 70575-01 | Hand Sanitizer, Fresh Scent, 0.125oz (3g) Pouch | each | $118.00 |  |
| 70575-02 | Hand Sanitizer, Fresh Scent, 2oz Squeeze Bottle | each | $1.50 | |
| 70575-03 | Hand Sanitizer, Fresh Scent, 1.5oz Tottle Bottle | each | $1.50 | |
| 70575-16 | Hand Sanitizer, Fresh Scent, 16oz Pump Bottle | each | $9.50 | |
| 70575-64 | Hand Sanitizer, Fresh Scent, 64oz Bottle | each | $36.00 | |
| 70575-50 | Wall Mount Bracket | each | $25.00 | |
Smooth Rack™
SmoothRack™ is an improvement over the old fashioned 3-tier-wire-racks:
When using SmoothRack, tubes will never slip into an adjacent position.
The SmoothRack is versatile and it accommodates a wide range of tubes: 10 to 16 mm diameter.
- A drainage hole right on each tube position
- Holds 72 tubes, available in Blue or White
- Made from autoclavable polypropylene
- Made in USA – Patent pending
- Dimensions: 9.5” L x 5” W x 2.6” H
| 64640-W | SmoothRack™, color White | each | $18.00 | |
| 64640-B | SmoothRack™, color Blue | each | $18.00 | |
Adjustable Cover-glass Rack:
EXCLUSIVE!!!!!!
Innovative design saves you time and headache when you are looking for a cover-glass holder!
This rack is machined from polypropylene and fabricated to accommodate a variety of cover-glasses in different sizes. With The ability to simply adjust the holder to fit your desired size and then securing it by tightening the reset screws with the hex key (hex key is included)all sizes of cover glasses are accommodated. Because the holder is made from non ferrous material, it is microwaveable. The rack accommodates 10 cover glasses, round, square or rectangular, adjusting from 5 mm to 60 mm. Removable handle. Rack comes with two set of holding rods. One set accommodate cover glasses from 5 to 25mm, and the other set for cover glasses from 5mm to 60mm.
Rack measures 1 ½” W x 1 ½” H (48 x48 mm)
| 72243 | Adjustable Coverglass Rack | each | $150.00 | |
DUMONT Tweezers Set
Made from lightweight plastic and padded with protective foam inside, this tweezers storage box offers you the safe place to store your delicate and valuable tweezers, but keeps them at your reach when you need them.
Set of 7 DUMONT Dumoxel/Biology quality tweezers, includes styles #3 (72690-D), #5 (72700-D), #5/45° (72703-D), #5/15° (72708-D), #5AC (72730-D), #N5 (72854-D) and #7 (72800-D), This set is ideal for ultramicrotomy work.
| 72891-01 | DUMONT Box & Tweezers Set | each | $221.50 | |
| 72891-Bx | DUMONT Tweezers Box Only | each | $40.00 | |
Multi Task BEEM Capsule Holder:
Exclusive !!!!
This Multi-Task BEEM Capsule Holder is an innovative holder designed to hold size “00” BEEM capsule during resin polymerization.
This holder is also a perfect tool when embedding and polymerizing resin by microwave, especially when the embedment needs to be performed under water. The direct contact of the microwave energy to the resin inside the microwave is usually causes the resin to heat to quick and that leads to micro bubbles forming inside the resin block and this causes unknown damage to the tissues. To help eliminate this problem, the resin capsule should be immersed in the water bath during microwave irradiation of the resin. This ‘indirect contact’ of microwave energy to the resin will help the embedding block polymerize nicely and homogeneously and also avoids the overheating of the tissue.
Mold is machined from polyethylene block, comes in two parts: bottom part which holds the BEEM capsule, and the second part which is placed on top and is securd by two plastic screws to ensure the BEEM capsules are in place and capsule lid will not pop out during under water polymerization or microwave irradiation.
Accompanies is microwave transparent tray, which holds water and capsule holder for microwave processing.
Measures: 1 1/8” L x 3” W x 2” H , accommodates 24 capsules.
You can order either the Multi-Task Capsule Holder only, or the set which includes one Capsule Holder and one Tray.
| 70023-01 | Multi Task BEEM Capsule Holder, each | $130.00 | each | |
| 70023-10 | Multi Task BEEM Capsule Holder Set | 132.00 | each | |
| 97082 | Microwave Transparent Tray, 10/pack | $20.00 | each | |
Micro Tube Rack- Microwaveable
Polypropylene floating racks keep microtubes submerged in a water bath – perfect for controlling sample temperature. Detachable legs give the users more options: attach legs so rack stands upright on benchtop, or detach legs so sample tubes can be quickly popped out by pushing down onto any surface.
Ideally to hold microcentrifuge tube in water bath during polymerization, such as LR White®, JB4…
Not autoclavable. Measures: 60 mm high, including legs.
| EMS # | Wells | Tubes | Shapes/Color | Qty | Price | |
| 72372-SB | 16 | 0.4/0.5 ml | Square (102mm) Black | each | $14.00 | |
| 72372-SW | 16 | 1.5/2.0 ml | Square (102 mm) White | each | $14.00 | |
| 72372-R8 | 8 | 1.5/2.0 ml | Round (68 mm) White | each | $14.00 | |
| 72372-R20 | 20 | 1.5/2.0 ml | Round (98 mm) White | each | $14.00 | |
Polyethylene Molds - Individual
Molded from polyethylene, three popular sizes is available to serve your needs. These Individual Molds can be used with EBH2 Block Holders, #70175-50, 70175-60, or with colored stubs 70175-70. Aluminum Embedding Tray is available with 6-position to hold these Individual Mold during polymerization. Comes with anodized blue and natural color.
Suitable for JB-4®, JB-4-Plus®, Immuno-Bed, LR White, LR Gold® or Paraffin embedding.
| 70177-12 | Individual Mold, 12 x 8 mm | 100/pack | $ 95.00 | |
| 70177-16 | Individual Mold, 16 x 8 mm | 100/pack | $95.00 | |
| 70177-19 | Individual Mold, 19 x13 mm | 100/pack | $95.00 | |
| 70178-04 | Embedding Tray, Aluminum, (2 Blue & 2 Natural colors) |
4/pack | $130.00 | |
| 70175-40 | 4mm Thin Embedding Stubs | 100/pack | $275.00 | |
| 70175-50 | 6mm Thick Embedding Stubs | 50/pack | $104.00 | |
| 70175-60 | 10mm Thick Embedding Stubs, Mixed Colors | 100/pack | $275.00 | |
PTFE Embedding Mold
Machined from PTFE block. This mold offers flat embedding for most resins, including LR White®, LR Gold®, JB-4, Immuno-Bed and Lowicryl®. This PTFE Flat Embedding Mold can be used for both UV/low temperature and thermal cure, and may be used as a substitution for the silicone molds. The individual cavities are pre shaped to reduce block trimming.
For curing anaerobic material, we recommend using Aclar® film, cut-to-size of the mold and lower on top of the mold after you ‘just over-fill’ the cavities with embedding resin. Due to the flexibility of the PTFE, you just bent the mold to pop out the cured resin blocks. After all the cast blocks have been removed, reinsert the mold to its holder to re-shape the mold. The mold holder is machined from aluminum and anodized black.
Mold with 18 cavities, each cavity measures 5mm W x 14mmL x 4mm Deep
Overall mold measures: 5 ½” x 3” x ¼” (140x50x8mm)
Mold is available as a set (includes one PTFE mold and one aluminum holder).
| 70143 | PTFE Flat Embedding Mold, set | each | $150.00 | |
| 70143-R | PTFE Flat Embedding Mold only | each | $120.00 | |
Staining Jars
5 and 10- place Staining Jars
ABS staining jars hold 5 or 10 slides horizontally. Each jar holds both standard (75 x 25mm) and the slightly larger (76 x 26 mm or 3x1”) slides. The 5-place jar measures: 84 x 33 x 42 mm; 10-place jar is 84 x 58 x 42 mm.
| 71383-05 | 5-Place Staining Jar, Color Red | each | $4.00 | |
| 71383-10 | 10-Place Staining Jar, Color Blue | each | $5.00 | |
LockMailer™ - Microscope Slide Jar
This is a tamperproof multi purpose container for mailing, staining or storing microscope slides.
Constructed from extra strong and opaque clear polypropylene, and high density polyethylene leakproof tamper evident screw cap (The LockMailer can also be used without the tamper evident feature by not used the lock tab), it will hold up to 4 standard 3 x 1” or 25 x 75mm slides vertically. Inside chambers are slotted to keep slides safely separated. For color coding purposes, use Capinsert™ (#61805-series) that may be inserted on top of closure.
This LockMailer™ can be used as a small staining vessel. This unit is designed for maximum stability on a bench top with liquid volume only 14 ml. Each standard volume of one slide is 2 ml, therefore when you want to stain 4 slides in this vessel you need only 6 ml of staining solution.
Dimensions: 35 x87mm H (1 3/8” x 3 7/16”H). Packaging: 100 per pack.
| 71406-10 | LockMailer™ Microscope Slide Jar, | 100/pk | $30.00 | |
Color coded CapInsert™ is available for the LockMailer™
| 61806-W | CapInsert™, White | 100/pk | $3.50 | |
| 61806-B | CapInsert™, Blue | 100/pk | $3.50 | |
| 61806-R | CapInsert™, Red | 100/pk | $3.50 | |
| 61806-L | CapInsert™, Lilac | 100/pk | $3.50 | |
| 61806-Y | CapInsert™, Yellow | 100/pk | $3.50 | |
| 61806-AS | CapInsert™, Assorted Colors | 100/pk | $3.50 | |
Razor Blade in Dispenser and Used Blade Storage Box in One
These GEM single edge carbon steel razor blades (0.009” thick) are in a compact, safe, pop-up blade dispenser and used blade storage all in one unit.
- Safe, easy to remove blade when needed
- Secure used blade storage in rear of unit
- Clear see through cover reveals remaining blades
- Push button dispenses blades
- 100 blades in dispenser
| 71955-01 | Razor Blade in Dispenser/Used Storage Box in One | each | 14.00 | |
Tru North® Chilling Jar
Quick freeze samples at -1°C minute rate
Designed to rapidly chill cryogenics vials in freezer –alcohol filled jar speeds freezing rate. Fill jar to visible level with isopropanol. Sample vials are not in contact with liquid – insert provides barrier while alcohol is securely contained. When samples are removed from freezer, the insulating foam holder decreases warming rate and extends working time.
Holds eight 1.2 to 2.0 ml cryogenic vials, fits most brands. Lift with arrow tab to remove insert from jar- float insert in water bath to warm samples after freezing if needed. Unit includes polycarbonate jar, high density polyethylene lid and insert, and polyurethane foam jacket. Measures: 123 mm dia x 105 m H.
| 64475 | Tru North™ Chilling Jar | $72.00 | each | |
Sprout® Mini-Centrifuge
Newly improved rubber footplate includes soft feet to increase stability and deadens vibration
This compact mini-centrifuge is ideal for quick spin-downs from tube walls and caps. Use to microfilter cell separations and HPLC samples. Most spin last around 20 seconds, so Sprout® is designed for easy repeat opening. Ergonomically designed lid fits the palm of the hand comfortably.
Operation is very simple: load tubes, close lid, press ON/OFFF button. For repeated spin, simply open or close the lid to operate. Internal safety switch ensure unit will not operate with lid open.
This personal centrifuge uses minimal benchtop space. Removable cord for easy storage. Unit is ETL, cETL, and CE marked and also complies with European RoHS directive.
Specifications:
| Maximum Speed | : 600 rpm |
| Maximum RCF | : 2000 x g |
| Dimensions | : 153 x 128 x 104 mm |
Tubes accommodation:
- Circular rotors and adapters combine to hold up to 6 microtubes (2.0 ml, 1.5 ml, 0.5 ml, or 0.4 ml)
- Straight rotor holds up to 16 PCR tubes (individual or two strips of 8)
Circular rotors are glass-filled polycarbonate; straight rotor is unfilled polycarbonate.
This mini Sprout unit includes:
- Two interchangeable rotors cover all applications – includes a set of adapters to accommodates all major microtubes and PCR tube styles.
- Storage case – Polyurethane foam case keeps extra rotors and adpters contained and dust-free.
- Tube Rack – Handy for handling samples before and after quick spins.
| 72360-US | Sprout®, 110/120 VAC for US | $298.00 | |
| 72360-EU | Sprout®, 220/230 VAC for Europe | $298.00 | |
| 72360-AU | Sprout® 220.230 VAC for Australia | $298.00 | |
| 72360-UK | Sprout® 220/230 VAC for UK | $298.00 | |
Cell Disruptors and Media Disruptor Genie™
- Rapid hands-free disruption of up to 12 microtubes (1.5 ml or 2.0 ml) at one time
- Unique agitation, vortexing, and collision actions for cell disruption and sample resuspension
- Maintain operating speed for up to 15 minutes or continuous operation, even in cold rooms
- Supplied pop-up cup easily attaches for use as a standard single-tube vortex mixer
- Ideal for glass bead procedures using Disruptor Beads
- Less costly than ultrasonic units or homogenizes
Disruptor Beads
- Spherecal lead-free soda lime glass beads are available in two sizes
- Can be used for disruption of yeast, bacteria, and other samples
- Used in combination with Disruptor Genie or TurboMix™ attachments for Vortex-Genie™ 2, Vortec-Genie™ 2T or Digital Vortex-Genie™ 2
Specifications
| Disruptor Beads | |
| 0.1 mm diameter beads for bacteria | 375g (8 fl. oz.) |
| 0.5 mm diameter beads for yeast | 375g (8 fl. oz.) |
|
Disruptor Genie 1.5 ml |
Disruptor Genie 2.0 ml |
| Supplied | 1.5 ml Microtube Holder (tube not included) & Pop-off Cup | 2.0 ml Microtube Holder (tube not included) & Pop-off Cup |
Dimensions (base) |
165 x 122 x 190 mm (6.5 x 4.8 x.7.5 “) |
165 x 122 x 190 mm (6.5 x 4.8 x.7.5 “) |
Weight |
4.3 kg (9.5 lb) | (4.3 kg (9.5 lb) |
Ordering Information
| 72406-12 | 120 V, 60 Hz | 1.5 ml | each | $545.00 | |
| 72406-20 | 230 V, 50 Hz – No Plug | 1.5 ml | each | $545.00 | |
| 72406-Eu | 230 V, 50 Hz Euro-Plug | 1.5 ml | each | $545.00 | |
| 72406-Br | 230 V, 50 Hz British-Plug | 1.5 ml | each | $545.00 | |
| 72406-Sw | 230 V, 50 Hz Swiss-Plug | 1.5 ml | each | $545.00 | |
| 72406-Au | 230 V, 50 Hz Australian-Plug | 1.5 ml | each | $545.00 | |
| 72406-10 | 100 V, 50/60 Hz | 1.5 ml | each | $545.00 | |
| 72407-12 | 120 V, 60 Hz | 2.0 ml | each | $545.00 | |
| 72407-20 | 230 V, 50 Hz – No Plug | 2.0 ml | each | $545.00 | |
| 72407-Eu | 230 V, 50 Hz Euro-Plug | 2.0 ml | each | $545.00 | |
| 72407-Br | 230 V, 50 Hz British-Plug | 2.0 ml | each | $545.00 | |
| 72407-Sw | 230 V, 50 Hz Swiss-Plug | 2.0 ml | each | $545.00 | |
| 72407-Au | 230 V, 50 Hz Australian-Plug | 2.0 ml | each | $545.00 | |
| 72407-10 | 100 V, 50/60 Hz | 2.0 ml | each | $545.00 | |
| 72408-01 | Disruptor Beads, 0.1mm | 8 oz | each | $24.00 | |
| 72408-05 | Disruptor Beads, 0.5mm | 8 oz | each | $24.00 | |
TorrLube® Vacuum Oil and Lubricant
TorrLube® vacuum lubricants are manufactured to perform better than any other vacuum grease or oil available.
- TorrLube® has no non-metal solids, e.g. silicone ball filters
- TorrLube® has high thermal conductivity to minimize temperature difference between surface exposed to heat flux and heat sink surface
- TorrLube® is extremely stable up to 350°C
- TorrLube is 500 cSt oil at 40°C. TorrLube® has high viscosity so that no fluid flows out between the solid surfaces.
TorrLube® Oil is an extremely pure PFPE (Perfluoropolyalkether ) blend which is thoroughly distilled and then filtered through a submicron screen. TorrLube® Oil has the ability to withstand thermal expansion and contraction as well as chemical and mechanical stress, while still maintaining consistent viscosity. These properties make TorrLube® the ideal lubricant for bearings, automated slides, and screws that have a tendency to gall or cold weld while working under extreme conditions.
TorrLube® Extreme Grease is white, odorless, nonflammable, and chemically inert products based on TorrLube® Oil and the most advanced PTFE thickener available. It does not contain Sodium or Iron. TorrLube® Extreme Grease remains stable and will not break down under mechanical stress and lose its ability to hold TorrLube® Oil. TorrLube® Extreme Grease helps prevent sticking, jumping, and mechanical noise, securing smooth, controlled movement.
TorrLube in 1cc syringe – Each syringe contains 1 cc of TorrLube® lubricant with a #22 gauge blunt needle attached for close application. This size is ideal for use in small research units and for maintenance and service tool kits.
Syringes are packaged in a clean room environment and the needles are sealed to prevent contaminant or leakage.
Physical Properties of Torrlube® Extreme Grease
| Properties | Typical Values |
| NLGI Grade | 2 |
| Viscosity (base oil), cSt @ 40°C (104°F) | 500 |
| Vapor Pressure, torr | 1 x 10-9 |
| Density, g/ml @23°C (74°F) | 1.9 |
| Volatility Loss (22 hrs @260°C), % | <1 |
| Appearance | White grease |
| 60750-01 | TorrLube® 1cc Syringe | each | $116.00 | |
| 60750-20 | TorrLube® 2 oz Cartridge | each | $172.00 | |
TorrLube® Oil
A set of two small bottles, each containing 60cc of TorrLube® lubricant. Every bottle comes with a sealed cap. A luer lock cap and a #22 gauge blunt needle are provided for closed application. The bottle set is appropriate for larger manufacturing units and production fabs. Each twin pack of TorrLube® 60cc bottles is sealed to prevent leakage and contamination.
Physical Properties of TorrLube® Oil
| Properties | Typical Values |
| Viscosity (base oil), cSt @ 40°C (104°F) | 500 |
| Vapor Pressure, torr | 1 x 10-9 |
| Density, g/ml @23°C (74°F) | 1.9 |
| Volatility Loss (22 hrs @260°C), % | <1 |
| Appearance | Clear Liquid |
| 60752-01 | TorrLube® Oil,1x 60cc Bottle | each | $750.00 | |
| 60752-02 | TorrLube® Oil, 2x 60cc Set | each | $1450.00 | |
Sample Stub Vacuum Desiccators
Precision machined from a block of aluminum – anodized black - this Sample Stub Vacuum Desiccators accommodates 18 SEM Mounted Sample Stubs, pin style, under vacuum for year long.
- Compact and sturdy – will last as long as you own them,
- Prevents oxidation from occurring to the sample during long term storage
- All pin stubs are kept secure inside the chamber by a built in “O” ring in each position
- Very simple to use - Just need small vacuum pump to evacuate air out of the chamber
- Acrylic Clear top for easy viewing the contents
- Interlock when stack together to safe space.
- Ideal for transport and storage samples for SEM, TEM, FIB, AFM, etc.
Measures: 13 cm x 13cm x 4.5cm High. Chamber cavity is 10.4cm diameter x 18mm deep. Lid is made with 10mm thick clear acrylic.
| 76550 | SEM Stub Vacuum Desiccator | each | $790.00 | |
SEM Finder Grids
These two new SEM grids are designed to aid in the identification and localization of SEM specimens when placed on standard SEM stubs.
The SEMF2 allows for easy characterization and analysis of particles and suspensions.
The SEMF3 uses an alpha-numeric index, allowing up to 25 predetermined specimens to be fixed and then located in a SEM.
Type SEMF2
The larger cells are identified using numbers from 1 – 57. Each large cell is sub-divided into 4, making a total of 228 identifiable cells by reference to their number and geographical location.
| Overall Diameter: | 10 mm |
| Overall Thickness: | ~50 µm |
| Material: | Copper, Nickel or Gold |
Type SEMF3
25 cells are identified by reference to their alpha-numeric position. The large asymmetric cut-out feature in the rim enables the right view to be easily obtained when placing on a SEM stub.
| Overall Diameter: | 10 mm |
| Overall Thickness: | ~50 µm |
| Material: | Copper, Nickel or Gold |
| 80102-Cu | SEMF2, Copper | 10/vial | $70.00 | |
| 80102-Ni | SEMF2, Nickel | 10/vial | $80.00 | |
| 80102-Au | SEMF2, Gold | 5/vial | $130.00 | |
| 80103-Cu | SEMF3, Copper | 10/vial | $70.00 | |
| 80103-Ni | SEMF3, Nickel | 10/vial | $80.00 | |
| 80103-Au | SEMF3, Gold | 5/vial | $130.00 | |
