Aperture Flamer Instructions

EMS Catalog #40001& 40002

1. Place disc in cup or hang strip from hook on cup.
2. Turn the torch to a low small blue flame.
3. Hold the torch ½" to ¾" above aperture.
4. Slowly increase the flame to avoid the disc blowing from the cup.
5. Heat the aperture until glowing for no more then 5 seconds.

Note: The force of the heat cleans the aperture rather then the flame itself

Online Ordering

Aperture Flamer Instructions are available online from the EMS Catalog. For ordering or product information, click here.