Quick-Test Auto-Scanning Tweezers and Tweezer Accessories
Quick-Test Auto-Scanning Tweezers
Precise, non-magnetic tips reliably contact smallest SMD. The Quick Test tweezers gives users an easy way to sort and evaluate loose components and to perform on-board measurements and debugging. Surface mount devices are usually tiny and without wire leads, making it much more difficult to test and identify SMD than conventional components. Precise tips, made of non-magnetic steel, are able to pick and reliably contact even the smallest SMD components, or take measurements from the device already mounted on a board. The probe can also be used to test conventional components with wire leads too short to insert into the test terminals.
Features:
- Measures AC/DC voltage, resistance, continunity & diode test
- Auto Scanning Mode/Auto range
- Testing pins gold plated to reduce resistance and prevent rust
- Uses Lithium battery CR2032, included
- Will automatically identify whether component is a resistor, capacitor or diode
Specifications:
| Resistance Range | 300/3K/30K/300K/3m/30M Ohms | Resolution: 0.1 Ohms |
| Capacitance Range | 3/30/300/nF | 3uF/30uF/300uF/3mF/30mF | Resolution 1pF |
| Diode Check | Open Voltage: 2.8V | Testing Current: 2mA |
| Continuity Check | When resistance is less than 30 ohms the buzzer will be activated |
| Weight | 0.75 lb |
| 72907-01 | Smart Tweezers, Straight Tips | each | 56.00 | Add to Cart |
EMS Tweezers
Full Plastic Tweezers - Delrin
Tips: angled, pointed
Length: 4½" (115 mm)
B: 0.02" (0.5 mm)
A: 0.028" (0.7 mm)
C: 3.74" (9.5 mm)
| 78325-707 | Plastic Tweezers - Delrin - tips: angled, pointed, 115 mm | each | 10.00 | Add to Cart |
Full Plastic Tweezers - Delrin
Tips: curved, angled, pointed
Length: 4½" (115 mm)
B: 0.025" (0.6 mm)
A: 0.02" (0.5 mm)
C: 4.45" (11.3 mm)
| 78325-707A | Plastic Tweezers - Delrin - tips: curved, angled, pointed, 115 mm | each | 10.00 | Add to Cart |
High Precision Tweezers
Anti-Acid/Anti-Magnetic Stainless Steel
PTFE coated
Tips: straight, flat, squared head, thin, strong, superior finish
Length: 4¾" (120 mm)
| 78325-FT | High Precision Tweezers, 120 mm | each | 69.50 | Add to Cart |
General Purpose Tweezers
Anti-Acid/Anti-Magnetic Stainless Steel
PTFE coated
Serrated handles
Tips: straight, rounded, flat
Length: 4¾" (120 mm)
| 78326-321 | General Purpose Tweezers, 120 mm | each | 52.00 | Add to Cart |
Plastic Wafer Tweezers
Designed for low cost and ease of use with the highest quality of materials.
| 78310-04 | Glass-filled Delrin for delicate, thin, and flat objects, 11.3cm long | each | 10.00 | Add to Cart |
| 78310-41 | Same as #78310-04 but made from Linear polyethylene, acid resistant | each | 10.00 | Add to Cart |
| 78310-05 | Glass filled Delrin, useful for handling coverslips or glass slides 11.3 cm long | each | 10.00 | Add to Cart |
| 78310-51 | Same as #73810-05 but made from Linear polyethylene, acid resistant | each | 10.00 | Add to Cart |
| 78310-06 | Glass-filled Delrin, good for glass slides, wafer handling, 11.3cm long | each | 10.00 | Add to Cart |
| 78310-61 | Same as #73810-06 but made from linear polyethylene, acid resistant | each | 10.00 | Add to Cart |
| 78310-07 | Glass-filled Delrin with extra wide point, 11.3cm long | each | 10.00 | Add to Cart |
| 78310-71 | Same as #78310-07 but made from linear polyethylene, acid resistant | each | 10.00 | Add to Cart |
| 78311-4A | Fluorocarbon, acid resistant, extra long with line up pin, 16.5cm long | each | 16.00 | Add to Cart |
| 78311-5A2 | Linear polyethylene, acid resistant, 16.5cm long | each | 14.00 | Add to Cart |
Plastic Wafer Pliers
| 78314-P1 | Glass-filled Delrin pliers. Serrated jaws, hold tubes securely, resistant to most solvents | each | 14.00 | Add to Cart |
| 78314-P2 | Glass-filled Nylon pliers, flat smooth jaws. Good for handling soft materials. Protected from damage.15 cm long | each | 14.00 | Add to Cart |
Plastic Tweezers
Resist virtually any commercial solvent, i.e. Nitric, Aqua-Regia, Acetic acid, Acetone, Alcohol, etc. Tips will not open when extra pressure is applied.
- Acid Resistant
- Non-Magnetic
- Gentle Positive Grip
- Non-Absorbent
| 78560-01 | Semiconductors, Chips, Wafers 4-9/16" x 7/16" body tapers down to .008" thick by ⅛" wide at tweezer tips. |
each | 4.00 | Add to Cart |
| 78560-02 | Made of Celcon static dissipative
(ESD safe). Max temp 175°F 4-9/16" x 7/16" body tapers down to .008" thick by ⅛" wide at tweezer tips. |
each | 4.50 | Add to Cart |
| 78560-03 | Blue Styrene tweezers, designed for handling wax patterns 115 mm long with 4 mm wide ribs. |
each | 3.50 | Add to Cart |
| 78560-04 | Made of Ryton (PPS) when properly used, will withstand 425°F 4-9/16" x 7/16" body tapers down to .008" thick by ⅛" wide at tips. |
each | 6.00 | Add to Cart |
| 78560-06 | Standard Version, useful in chemical processing of semiconductors Celcon static dissipative (ESD safe). Max temp 175°F 4-9/16" x 7/16" body tapers down to .009" by 3/32" at tips. |
each | 3.50 | Add to Cart |
| 78560-13 | Made of Celcon static dissipative (ESD safe). Max temp is 175°F. 4-9/16" x 7/16" body tapers down to a sharp point at tips. |
each | 4.50 | Add to Cart |
| 78560-15 | Wide Tips, Glass-filled Delrin 9mm, 11.3cm long |
each | 10.00 | Add to Cart |
| 78560-19 | Maximum visibility (9/64" when closed). For handling of small parts in confined areas. 4⅜" x 7/16" body tapers down to fine angled points, flat inside, assuring positive holding grip. |
each | 4.00 | Add to Cart |
| 78560-20 | Standard Version 4-9/16" x 7/16" body tapers down to .009" by 3/32" at tips. |
each | 4.00 | Add to Cart |
Tweezer Holder
Holds 6 tweezers. Keeps tips protected in an easy to reach position.
| 72900 | Tweezer Holder | each | 20.00 | Add to Cart |
EMS Tweezer Protection Box
Made from soft silicone; grooved properly to tightly hold all types of tweezers in place. The tip of the tweezer is always well protected from any damage. The silicone pad is held in a plastic box with a hinged lid that keeps the tweezers free from dust. Holds 7 tweezers.
Overall measurements: 6⅛"(L) x 4⅛"(W) x 1⅜"(H)
Inside measurements: 6"(L) x 4"(W) x 1¼"(H)
| 72902 | Tweezer Protection Box | each | 32.00 | Add to Cart |
Wooden Tweezers Holder Case
Made from solid wood, with brass double hinges and an elegant latch.Comes with a foam padded top and bottom to protect stored tweezers. The inside measures 5¾" x 4⅞ " (145 x 124 mm) and it holds 5 tweezers with a maximum length of 140mm.
| 72898-01 | Wooden Tweezers Holder Case | each | 52.00 | Add to Cart |
O-Ring for Tweezers
This Neoprene O-Ring is used as a simple clamping device for tweezers.
| 72903-12 | Tweezers O-Ring | 12/pk | 2.00 | Add to Cart |
Tweezers Protection Cap
These caps which are in the shape of the tweezer tip are made from Polyethylene and are used to protect the tweezers tips from damage.
| 72904-12 | Tweezers Protection Cap | 12/pk | 1.50 | Add to Cart |
