Questions? 800-523-5874 | [email protected]
- Prepmaster™ Specimen Preparation Robot
- TEM Grids
- TEM Window Grids
- Omniprobe Nanomanipulation Systems
- K-kit Wet "Liquid" TEM Kit
- Specimen Mounts
- SEM Specimen Holders
- Index and Finder SEM Grids
- SEM for Forensics
- SEM Sample Preparation Station Materials
- Cryogenic Personal Protection Equipment
- Cryo Dewars & Flasks
- Cryogenic Grids & Accessories
- Cryogenic Vials & Racks
- Cooling Chambers & Ice Baths
- Prepmaster™ Specimen Preparation Robot
- Laboratory Microwave Ovens
- LYNX II Automated Tissue Processor
- EMS Poly III
- Microtomes
- Tissue Slicers
- Rapid Immersion Freezer
- Heaters & Chillers
- SEM Cooling Stage
- Glow Discharge Systems
- Sputter Coaters & Carbon Coaters
- Stages
- Freeze Dryers
- Critical Point Dryers
- Cryo-SEM Preparation System
- Specimen Transfer Systems
- Decontaminators
- Desiccators
- Centrifuges
- Dry Baths
- Stirrers, Hot Plates
- Vortexers & Magnetic Mixers
- Rotators & Rockers
- Ovens & Incubators
- Vibration Isolation
- Air Sampling
- Vacuum Pumps
EMS Technical Data Sheets
Sub-X® Mounting Medium
EMS #13519
A permanent mounting medium formulated for use with Sub-X® Clearing Agent but may be used for all routine mounting. DO NOT USE Sub-X® clearant to dilute mounting medium. A small amount of Toluene or Xylene must be used to reduce viscosity. Xylene or toluene must be used to remove coverslips that have set up.
Store at room temperature 59-86°F(15-30°C)
Flash point CC: 53°F (12°C)
Online OrderingSub-X® Mounting MediumSub-X® Mounting Medium MSDS
| Hazardous Ingredient | % wt. | CAS no. |
| Toluene | <75 | 108-88-3 |
| Acrylic Resin | <50 |
80-62-6 |
| Butyl Benzyl Phthalate | <10 |
85-68-7 |
| Antioxidant | <1 | 128-37-0 |