Questions? 800-523-5874 | [email protected]
- Prepmaster™ Specimen Preparation Robot
- TEM Grids
- TEM Window Grids
- Omniprobe Nanomanipulation Systems
- K-kit Wet "Liquid" TEM Kit
- Cryogenic Personal Protection Equipment
- Cryo Dewars & Flasks
- Cryogenic Grids & Accessories
- Cryogenic Vials & Racks
- Cooling Chambers & Ice Baths
- Prepmaster™ Specimen Preparation Robot
- Laboratory Microwave Ovens
- LYNX II Automated Tissue Processor
- EMS Poly III
- Microtomes
- Tissue Slicers
- Rapid Immersion Freezer
- Heaters & Chillers
- SEM Cooling Stage
- Glow Discharge System
- Sputter Coaters & Carbon Coaters
- Stages
- Freeze Dryers
- Critical Point Dryers
- Cryo-SEM Preparation System
- Specimen Transfer Systems
- Decontaminators
- Desiccators
- Centrifuges
- Dry Baths
- Stirrers, Hot Plates
- Vortexers & Magnetic Mixers
- Rotators & Rockers
- Ovens & Incubators
- Vibration Isolation
- Air Sampling
- Vacuum Pumps
Filters
Filter by attributes
- Material
Filter by manufacturer
SEM Specimen and FIB and STEM Sample Holders
Sort by
Product Name
Ordering Info
EMS Orbital Specimen Holder
The EMS Orbital Specimen Holder's clever design allows you to effortlessly rotate the specimen 60° around the axis perpendicular to the electron beam. The position and hold of the sample can be controlled with the simple turn of a screw.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: 75911 | Description: EMS Orbital Specimen Holder, Pin Mount | Pack: Each | Price: $286.00 |
Add to Quote:
|
|
|
| Cat #: 75912 | Description: EMS Orbital Specimen Holder, M4 Mount | Pack: Each | Price: $286.00 |
Add to Quote:
|
|
EMS 24-Place SEM Holder
This 24-place holder is made from aluminum and offers a stage travel of 100mm x 50mm (which is perfect to be used with the Hitachi VP SEM). The holder has a unique identification number so every hole is identifiable.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: 75958-67 | Description: 24 Place SEM Holder | Pack: Each | Price: $416.00 |
Add to Quote:
|
|
Specimen Holders For SEM
Scanning electron microscope specimen holders are machined from solid aluminum.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: 75910 | Description: Armray Base Universal Holder | Pack: Each | Price: $303.00 |
Add to Quote:
|
|
|
| Cat #: 75910-01 | Description: Armray Base Universal Holder, Pin A | Pack: Each | Price: $303.00 |
Add to Quote:
|
|
|
| Cat #: 75910-02 | Description: Armray Base Universal Holder, Pin B | Pack: Each | Price: $303.00 |
Add to Quote:
|
|
|
| Cat #: 75910-03 | Description: Armray Base Universal Holder, Pin C | Pack: Each | Price: $303.00 |
Add to Quote:
|
|
Vertical Mount for Thin Samples
Scanning electron microscope specimen holders are machined from solid aluminum. Supplied with 4 removable sample arms the, it will hold almost any sample vertically in the SEM or microscope from 3 mm to 29 mm in diameter plus various odd shaped samples.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: 75915 | Description: Vertical For Thin Sample | Pack: Each | Price: $275.00 |
Add to Quote:
|
|
|
| Cat #: 75915-01 | Description: Vertical For Thin Sample, Pin A | Pack: Each | Price: $275.00 |
Add to Quote:
|
|
|
| Cat #: 75915-02 | Description: Vertical For Thin Sample, Pin B | Pack: Each | Price: $275.00 |
Add to Quote:
|
|
|
| Cat #: 75915-03 | Description: Vertical For Thin Sample, Pin C | Pack: Each | Price: $275.00 |
Add to Quote:
|
|
Multi Pin Holder
Scanning electron microscope specimen holders are machined from solid aluminum. Designed to save pump down time and keep your chamber cleaner.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: 75920 | Description: 3-Pin Configuration Holder | Pack: Each | Price: $97.00 |
Add to Quote:
|
|
|
| Cat #: 75920-01 | Description: 3-Pin Configuration Holder, Pin A | Pack: Each | Price: $98.00 |
Add to Quote:
|
|
|
| Cat #: 75920-02 | Description: 3-Pin Configuration Holder, Pin B | Pack: Each | Price: $98.00 |
Add to Quote:
|
|
|
| Cat #: 75920-03 | Description: 3-Pin Configuration Holder, Pin C | Pack: Each | Price: $98.00 |
Add to Quote:
|
|
|
| Cat #: 75921 | Description: 5-Pin Configuration Holder | Pack: Each | Price: $125.00 |
Add to Quote:
|
|
|
| Cat #: 75921-01 | Description: 5-Pin Configuration Holder, Pin A | Pack: Each | Price: $125.00 |
Add to Quote:
|
|
|
| Cat #: 75921-02 | Description: 5-Pin Configuration Holder, Pin B | Pack: Each | Price: $125.00 |
Add to Quote:
|
|
|
| Cat #: 75921-03 | Description: 5-Pin Configuration Holder, Pin C | Pack: Each | Price: $125.00 |
Add to Quote:
|
|
SI First Stage Holder
Scanning electron microscope specimen holders are machined from solid aluminum. This Copper sample holder to fit in the first stage of the ISI DS 130 and 150 SEM's. Inner cylinder is height adjustable to adjust to the correct working distance.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: 75925 | Description: ISI First Stage Holder | Pack: Each | Price: $39.00 |
Add to Quote:
|
|
SEM Sample Holder Set
Set consists of one universal holder, one vertical mount holder for thin samples, one 3-pin and one 5-pin configuration holder. In a finely finished wood box. Specify the base requirement for your instrument.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: 75930 | Description: SEM Sample Holder Set | Pack: Set | Price: $638.00 |
Add to Quote:
|
|
SEM Stub Freeze Dry Holder
Our aluminum stub holder offers many uses, including holding ?" (3.1 mm) pin stubs for freeze drying. Has a diameter of 3.1 mm and holds five pin stubs.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: EMS001 | Description: SEM Stub Freeze Dry Holder | Pack: Each | Price: $90.00 |
Add to Quote:
|
|
Cambridge Pin Stub Adapter
This adapter will convert 1/8" (3.1 mm) pin stub holders to the re-entrant type 1 1/4" (32 mm).
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: EMS002 | Description: Cambridge Pin Stub Adapter | Pack: Each | Price: $105.00 |
Add to Quote:
|
|
Dual Size SEM Sample Holder
A simple holder which will hold ?" (3.1 mm) pin stubs on one side, or any other solid stub in the other side. Useful for specimen preparation, coating, freeze drying, as well as storage.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: EMS003 | Description: Dual Size SEM Sample Holder, 15 mm | Pack: Each | Price: $108.00 |
Add to Quote:
|
|
|
| Cat #: EMS004 | Description: Dual Size SEM Sample Holder, 10 mm | Pack: Each | Price: $108.00 |
Add to Quote:
|
|
|
| Cat #: EMS004A | Description: Dual Size SEM Sample Holder, 12.5 mm | Pack: Each | Price: $108.00 |
Add to Quote:
|
|
Stainless Steel Freeze Drying Pots
An interlocking 25 mm diameter sample holder for bulk specimens that allows safe handling of valuable low temperature specimens whilst minimizing temperature fluctuations.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: EMS007 | Description: 25 mm Bulk F Dryer | Pack: Each | Price: $189.00 |
Add to Quote:
|
|
|
| Cat #: EMS008 | Description: 25 mm Bulk F Dryer Set | Pack: Each | Price: $559.00 |
Add to Quote:
|
|
|
| Cat #: EMS009 | Description: Handling Tongs | Pack: Each | Price: $90.00 |
Add to Quote:
|
|
|
| Cat #: EMS010 | Description: 25mm F.M. Freeze Drying Pot | Pack: Each | Price: $154.00 |
Add to Quote:
|
|
|
| Cat #: EMS012 | Description: 50mm F.M. Freeze Drying Pot | Pack: Each | Price: $234.00 |
Add to Quote:
|
|
|
| Cat #: EMS013 | Description: 50mm F.M. Freeze Drying Pot Set of Three | Pack: Set | Price: $693.00 |
Add to Quote:
|
|
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: EMS025A | Description: 3" (75 mm) Diameter SEM Stub, 10 mm | Pack: Each | Price: $148.00 |
Add to Quote:
|
|
|
| Cat #: EMS025B | Description: 3" (75 mm) Diameter SEM Stub, 12.5 mm | Pack: Each | Price: $148.00 |
Add to Quote:
|
|
|
| Cat #: EMS025C | Description: 3" (75 mm) Diameter SEM Stub, 15 mm | Pack: Each | Price: $148.00 |
Add to Quote:
|
|
|
| Cat #: EMS025D | Description: 3" (75 mm) Diameter SEM Stub, 19 mm | Pack: Each | Price: $148.00 |
Add to Quote:
|
|
Cambridge SEM Carousel
A standard carousel holder made to fit Cambridge SEMs. Will hold 8 pin stubs. Comes complete with hexagonal wrench.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: EMS030 | Description: Cambridge SEM Carousel | Pack: Each | Price: $310.00 |
Add to Quote:
|
|
Cambridge Universal Stub Adapter
Universal adapter to fit Cambridge SEMs which then accepts interchangeable multi carousel, single pin stubs, or re-entrant stubs.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: EMS036 | Description: Interchangeable Carousel Adapter | Pack: Each | Price: $206.00 |
Add to Quote:
|
|
|
| Cat #: EMS037 | Description: Interchangeable Carousel | Pack: Each | Price: $178.00 |
Add to Quote:
|
|
SEM Stub Tool
A useful tool for assisting in loading and unloading SEM pin stubs from a loading stand or specimen box into the microscope. It features a Perspex handle with beryllium copper pins that give the tool a flexible, but stable, grip on the specimen stub.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: EMS005 | Description: SEM Stub Tool | Pack: Each | Price: $84.00 |
Add to Quote:
|
|
SEM Pin Stub Adapters
A simple to use adapter which will convert Hitachi, JEOL or ISI microscopes to use 1/8" pin stubs or Cambridge stubs. Made of aluminum with spring retainers which will give a good connection.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: EMS060 | Description: SEM Pin Stub Adapter, 10 mm | Pack: Each | Price: $52.00 |
Add to Quote:
|
|
|
| Cat #: EMS061 | Description: SEM Pin Stub Adapter, 15 mm | Pack: Each | Price: $52.00 |
Add to Quote:
|
|
|
| Cat #: EMS062 | Description: SEM Pin Stub Adapter, 12.5 mm | Pack: Each | Price: $52.00 |
Add to Quote:
|
|
Pin Mount Stub Adapters
Used to adapt 1/8" (3.1mm) pin diameter SEM stubs. Made from vacuum grade aluminum with a stainless steel set screw. Allen wrench included.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: 75940-07 | Description: Pin Stub Adapters, 16mm X 55mm (H) | Pack: Each | Price: $28.00 |
Add to Quote:
|
|
|
| Cat #: 75940-08 | Description: Pin Stub Adapters, 16mm X 25mm (H) | Pack: Each | Price: $30.00 |
Add to Quote:
|
|
|
| Cat #: 75940-09 | Description: Pin Stub Adapters, 15mm X 15mm (H) | Pack: Each | Price: $25.00 |
Add to Quote:
|
|
|
| Cat #: 75940-10 | Description: Pin Stub Adapter, 10X10mm | Pack: Each | Price: $30.00 |
Add to Quote:
|
|
|
| Cat #: 75940-11 | Description: Pin Stub Adapter, 15X10mm | Pack: Each | Price: $32.00 |
Add to Quote:
|
|
|
| Cat #: 75940-15 | Description: Pin Stub Adapter, 38X15mm | Pack: Each | Price: $32.00 |
Add to Quote:
|
|
|
| Cat #: 75940-16 | Description: Pin Stub Adapter, 38X16mm | Pack: Each | Price: $32.00 |
Add to Quote:
|
|
Cross Sectional Holder
Made from non-magnetic stainless steel with 3.1mm (1/8") diameter pin and adjustable angle turn-screw. Just insert specimens edge-on and observe the cross section directly.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: 75942-01 | Description: Cross Sectional Holder | Pack: Each | Price: $193.00 |
Add to Quote:
|
|
Four-Pin Stub Holder
It accommodates four pin type, up to 12.5 (1/2") surface specimen stubs, with 1/8" (3.1mm) diameter pin.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: 75944-04 | Description: Four Pin Stub Holder | Pack: Each | Price: $62.00 |
Add to Quote:
|
|
Five 10 mm Stub Holder
Scanning electron microscope holder accommodates five 10mm diameter specimen stubs, with 1/8" (3.1mm) diameter pin.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: 75945-05 | Description: Five 10mm Stub Holder | Pack: Each | Price: $77.00 |
Add to Quote:
|
|