Questions? 800-523-5874 | [email protected]
- Prepmaster™ Specimen Preparation Robot
- TEM Grids
- TEM Window Grids
- Omniprobe Nanomanipulation Systems
- K-kit Wet "Liquid" TEM Kit
- Specimen Mounts
- SEM Specimen Holders
- Index and Finder SEM Grids
- SEM for Forensics
- SEM Sample Preparation Station Materials
- Cryogenic Personal Protection Equipment
- Cryo Dewars & Flasks
- Cryogenic Grids & Accessories
- Cryogenic Vials & Racks
- Cooling Chambers & Ice Baths
- Prepmaster™ Specimen Preparation Robot
- Laboratory Microwave Ovens
- LYNX II Automated Tissue Processor
- EMS Poly III
- Microtomes
- Tissue Slicers
- Rapid Immersion Freezer
- Heaters & Chillers
- SEM Cooling Stage
- Glow Discharge Systems
- Sputter Coaters & Carbon Coaters
- Stages
- Freeze Dryers
- Critical Point Dryers
- Cryo-SEM Preparation System
- Specimen Transfer Systems
- Decontaminators
- Desiccators
- Centrifuges
- Dry Baths
- Stirrers, Hot Plates
- Vortexers & Magnetic Mixers
- Rotators & Rockers
- Ovens & Incubators
- Vibration Isolation
- Air Sampling
- Vacuum Pumps
EMS Technical Data Sheets
Technovit® 9100 Histology Technology Accessories
EMS Catalog #14655
Embedding mold specifically for Technovit® 9100
Polyethylene embedding forms 25 mm & "cradle" insert for the round specimen holder on the rotation microtome.
Additional sizes: 15 - 30 - 40 - 50 mm (only cylinder)
Application:
| 1. Remove bottom of form, stick the cradle and the form together |
|
|
| 2. Fill up insert |
|
|
| 3. Position specimen in the cradle |
|
|
| 4. Fill to brim. Turn on vacuum (approx. 10 min in the desiccator) max. 200 mbar, turn off vacuum |
|
|
| 5. Put lid on (airtight). Put in the refrigerator at -2°C/-4°C |
|
Source of Information
Heraeus Kulzer, 2014Product Information
Technovit® 9100 Methyl Methacrylate is available online from the EMSCatalog. For ordering or product information, .