Questions? 800-523-5874 | [email protected]
- Prepmaster™ Specimen Preparation Robot
- TEM Grids
- TEM Window Grids
- Omniprobe Nanomanipulation Systems
- K-kit Wet "Liquid" TEM Kit
- Specimen Mounts
- SEM Specimen Holders
- Index and Finder SEM Grids
- SEM for Forensics
- SEM Sample Preparation Station Materials
- Cryogenic Personal Protection Equipment
- Cryo Dewars & Flasks
- Cryogenic Grids & Accessories
- Cryogenic Vials & Racks
- Cooling Chambers & Ice Baths
- Prepmaster™ Specimen Preparation Robot
- Laboratory Microwave Ovens
- LYNX II Automated Tissue Processor
- EMS Poly III
- Microtomes
- Tissue Slicers
- Rapid Immersion Freezer
- Heaters & Chillers
- SEM Cooling Stage
- Glow Discharge Systems
- Sputter Coaters & Carbon Coaters
- Stages
- Freeze Dryers
- Critical Point Dryers
- Cryo-SEM Preparation System
- Specimen Transfer Systems
- Decontaminators
- Desiccators
- Centrifuges
- Dry Baths
- Stirrers, Hot Plates
- Vortexers & Magnetic Mixers
- Rotators & Rockers
- Ovens & Incubators
- Vibration Isolation
- Air Sampling
- Vacuum Pumps
EMS Technical Data Sheets
Formaldehyde Spill Response Kit
EMS Catalog #24141
Use:
- Put on disposable Respirator, Open Back Gown, Goggles and Gloves. (Always wear protective gear and exercise caution during clean up.)
- Sprinkle FSC-1 over spill evenly. The fluid will quickly set. Add more product as necessary.
- Remove solidified material with Scoop and Scraper and place in one of the supplied White Disposal Bags.
- Clean area with a hard surface wipe or disinfectant. Wipe up any residue left behind with supplied Wiper Pads.
- Remove protective clothing and place all contaminated materials (Wiper Pads, Respirator, Gown, Goggles and Gloves) in supplied Disposal Bag. Seal bag with supplied Twist Tie.
- Dispose of all waste in accordance with local, state and federal regulations.