Questions? 800-523-5874 | [email protected]
- TEM Grids
- Prepmaster™ Specimen Preparation Robot
- TEM Window Grids
- Omniprobe Nanomanipulation Systems
- K-kit Wet "Liquid" TEM Kit
- Specimen Mounts
- SEM Specimen Holders
- Index and Finder SEM Grids
- SEM for Forensics
- SEM Sample Preparation Station Materials
- Cryogenic Personal Protection Equipment
- Cryo Dewars & Flasks
- Cryogenic Grids & Accessories
- Cryogenic Vials & Racks
- Cooling Chambers & Ice Baths
- Prepmaster™ Specimen Preparation Robot
- Laboratory Microwave Ovens
- LYNX II Automated Tissue Processor
- EMS Poly III
- Microtomes
- Tissue Slicers
- Rapid Immersion Freezer
- Heaters & Chillers
- SEM Cooling Stage
- Glow Discharge Systems
- Sputter Coaters & Carbon Coaters
- Stages
- Freeze Dryers
- Critical Point Dryers
- Cryo-SEM Preparation System
- Specimen Transfer Systems
- Decontaminators
- Desiccators
- Centrifuges
- Dry Baths
- Stirrers, Hot Plates
- Vortexers & Magnetic Mixers
- Rotators & Rockers
- Ovens & Incubators
- Vibration Isolation
- Air Sampling
- Vacuum Pumps
EMS Technical Data Sheets
TPC Solvent
EMS #62820-35
TPC Solvent is a solvent, free of water, which has been created for use with a number of applications, especially in precision cleaning. It is useful for the removal of cutting oils, mold release, grease, smudges, fingerprints, and other soils alike. It is the ideal replacement for chlorinated solvents, kerosene and minerals.
Notable features
- Safe on all metals
- Flashpoint of 130°F TCC
- Dries without leaving residue
- Non-chlorinated
- Multiple uses
- Low vapor pressure
- High quality cleaning
- USDA authorized
- Safer than most solvents
- High dielectric voltage
- Meets Federal Specification P.D-680 Type I
- Low odor
This product is typically used for/with the following
- Wipe-down of metal surfaces prior to painting
- Cleaning electrical motors
- Degreasing bearings
- Adhesive carrier
- Benchtop cleaning in maintenance areas
- Washing of general parts
- Wipe-down of precision equipment
- Wipe-off cleaning of plastic molds
- Electrical contact and bus bar cleaning
Instructions
Use the TPC Solvent at room temperature to ensure no odor and the optimal removal of oils, greases, etc.
NOTE: Area in which TPC Solvent is used must be free of contaminants before use. All surfaces must be thoroughly cleaned with potable water after use.