Questions? 800-523-5874 | [email protected]
- Prepmaster™ Specimen Preparation Robot
- TEM Grids
- TEM Window Grids
- Omniprobe Nanomanipulation Systems
- K-kit Wet "Liquid" TEM Kit
- Specimen Mounts
- SEM Specimen Holders
- Index and Finder SEM Grids
- SEM for Forensics
- SEM Sample Preparation Station Materials
- Cryogenic Personal Protection Equipment
- Cryo Dewars & Flasks
- Cryogenic Grids & Accessories
- Cryogenic Vials & Racks
- Cooling Chambers & Ice Baths
- Prepmaster™ Specimen Preparation Robot
- Laboratory Microwave Ovens
- LYNX II Automated Tissue Processor
- EMS Poly III
- Microtomes
- Tissue Slicers
- Rapid Immersion Freezer
- Heaters & Chillers
- SEM Cooling Stage
- Glow Discharge Systems
- Sputter Coaters & Carbon Coaters
- Stages
- Freeze Dryers
- Critical Point Dryers
- Cryo-SEM Preparation System
- Specimen Transfer Systems
- Decontaminators
- Desiccators
- Centrifuges
- Dry Baths
- Stirrers, Hot Plates
- Vortexers & Magnetic Mixers
- Rotators & Rockers
- Ovens & Incubators
- Vibration Isolation
- Air Sampling
- Vacuum Pumps
EMS Technical Data Sheets
AirChek® Badges
EMS #64472-10, 64472-20, 64472-30, 64472-40, 64472-50
Chemical Monitoring Instructions
- Remove chemical vapor monitor (badge) from foil pouch and plastic bag. Save all packaging materials to send badge out for analysis. All badges have an expiration date . Expired badges cannot be analyzed.
- Record date and start time on the card and badge.
- Personal Monitoring: Clip badge to collar or lapel (breathing zone) with sticker side next to clothing.
- Area Monitoring: Attach badge to an object in desired area at the approximate height of the breathing zone.
- Make sure there are not any splashes that may contaminate the badge. Badges exposed over 12 hours can not be analyzed.
- At the end of the sample period , remove the badge and record your name and stop time on the card and the badge.
- Remove gloves before touching badge.
- Place badge in plastic bag and seal. Insert in foil pouch and seal. Complete all information on card. Incomplete information may delay results. Send badges to your service center for analysis.
Note: Glutaraldehyde badges require refrigeration after exposure.
It is not required to mail Glutaraldehyde badges cold.
Product Information