Questions? 800-523-5874 | [email protected]
- Prepmaster™ Specimen Preparation Robot
- TEM Grids
- TEM Window Grids
- Omniprobe Nanomanipulation Systems
- K-kit Wet "Liquid" TEM Kit
- Specimen Mounts
- SEM Specimen Holders
- Index and Finder SEM Grids
- SEM for Forensics
- SEM Sample Preparation Station Materials
- Cryogenic Personal Protection Equipment
- Cryo Dewars & Flasks
- Cryogenic Grids & Accessories
- Cryogenic Vials & Racks
- Cooling Chambers & Ice Baths
- Prepmaster™ Specimen Preparation Robot
- Laboratory Microwave Ovens
- LYNX II Automated Tissue Processor
- EMS Poly III
- Microtomes
- Tissue Slicers
- Rapid Immersion Freezer
- Heaters & Chillers
- SEM Cooling Stage
- Glow Discharge Systems
- Sputter Coaters & Carbon Coaters
- Stages
- Freeze Dryers
- Critical Point Dryers
- Cryo-SEM Preparation System
- Specimen Transfer Systems
- Decontaminators
- Desiccators
- Centrifuges
- Dry Baths
- Stirrers, Hot Plates
- Vortexers & Magnetic Mixers
- Rotators & Rockers
- Ovens & Incubators
- Vibration Isolation
- Air Sampling
- Vacuum Pumps
EMS Technical Data Sheets
Netwell Carrier and Handle Instructions
EMS Catalog # 64735 / 64736
To Load the Netwell Carriers
An easy method to load Netwells into the reusable carrier is to invert the plates leaving the netwells in the cover, then placing the carrier over the Netwells and reinverting the assembly.
To Use Handle:
- Remove the plate lid
- Grasp the handle, along its axis, between thumb and forefinger and squeeze (see drawing)
- Insert both ends of the handle into carrier (see drawing) and release handle.
- Change grip on handle 90° (this will prevent you from accidentally squeezing the handle and releasing the Netwells).
- Pick up the Netwells and transport to the next work station.
Online Ordering
Netwell Carriers are available online from the EMS Catalog. For ordering or product information, click here.