Questions? 800-523-5874 | [email protected]
- Prepmaster™ Specimen Preparation Robot
- TEM Grids
- TEM Window Grids
- Omniprobe Nanomanipulation Systems
- K-kit Wet "Liquid" TEM Kit
- Specimen Mounts
- SEM Specimen Holders
- Index and Finder SEM Grids
- SEM for Forensics
- SEM Sample Preparation Station Materials
- Cryogenic Personal Protection Equipment
- Cryo Dewars & Flasks
- Cryogenic Grids & Accessories
- Cryogenic Vials & Racks
- Cooling Chambers & Ice Baths
- Prepmaster™ Specimen Preparation Robot
- Laboratory Microwave Ovens
- LYNX II Automated Tissue Processor
- EMS Poly III
- Microtomes
- Tissue Slicers
- Rapid Immersion Freezer
- Heaters & Chillers
- SEM Cooling Stage
- Glow Discharge Systems
- Sputter Coaters & Carbon Coaters
- Stages
- Freeze Dryers
- Critical Point Dryers
- Cryo-SEM Preparation System
- Specimen Transfer Systems
- Decontaminators
- Desiccators
- Centrifuges
- Dry Baths
- Stirrers, Hot Plates
- Vortexers & Magnetic Mixers
- Rotators & Rockers
- Ovens & Incubators
- Vibration Isolation
- Air Sampling
- Vacuum Pumps
EMS Technical Data Sheets
Easy-Load Cassettes for Automated Labeling Instruments
EMS Catalog #70060
How to Insert
Note: For magazines with a metal release mechanism, load cassette sleeve from bottom of magazine.
- Place magazine on flat surface
- Insert stack of cassettes from bottom
- Insert cassettes until the last one is passed the metal release mechanism by pulling on plastic tie
- Cut plastic tie
- Lift and discard while holding cassettes in place with forefinger
- Place hopper in labeling instrument
How to Handle Cassettes after Printing
How to Install Cover
- Insert cover vertically until hinges click firmly into slots in front of cassette OR
- Cover can also be inserted at an angle
- Then press down on back tab
How to Remove Cover
- Lift tab at back of cassette with forefinger while depressing the center of the lid with thumb
- Pivot lid forward and it will disconnect automatically
Product Information
Easy-Load Cassettes for Automated Labeling Instruments