Questions? 800-523-5874 | [email protected]
- Prepmaster™ Specimen Preparation Robot
- TEM Grids
- TEM Window Grids
- Omniprobe Nanomanipulation Systems
- K-kit Wet "Liquid" TEM Kit
- Specimen Mounts
- SEM Specimen Holders
- Index and Finder SEM Grids
- SEM for Forensics
- SEM Sample Preparation Station Materials
- Cryogenic Personal Protection Equipment
- Cryo Dewars & Flasks
- Cryogenic Grids & Accessories
- Cryogenic Vials & Racks
- Cooling Chambers & Ice Baths
- Prepmaster™ Specimen Preparation Robot
- Laboratory Microwave Ovens
- LYNX II Automated Tissue Processor
- EMS Poly III
- Microtomes
- Tissue Slicers
- Rapid Immersion Freezer
- Heaters & Chillers
- SEM Cooling Stage
- Glow Discharge Systems
- Sputter Coaters & Carbon Coaters
- Stages
- Freeze Dryers
- Critical Point Dryers
- Cryo-SEM Preparation System
- Specimen Transfer Systems
- Decontaminators
- Desiccators
- Centrifuges
- Dry Baths
- Stirrers, Hot Plates
- Vortexers & Magnetic Mixers
- Rotators & Rockers
- Ovens & Incubators
- Vibration Isolation
- Air Sampling
- Vacuum Pumps
EMS Technical Data Sheets
ProCrystal™ Protein Crystallization Covers Instructions of Use
EMS Catalog #70470
 |
||
| Instructions are shown using 70470-70 as an example. | 1. Plate and Cover. Cover: adhesive liner facing up |
2. To expose the adhesive; peel off the clear release liner. |
 |
||
| 3. Release liner completely removed | 4. Handle cover by the protected edges, aligning to the plate over the wells. | 5. Press firmly to seal cover to the wells. |
 |
||
| 6. Remove backing liner and frame by peeling slowly. | 7. | 8. Frame and backing liner completely removed. |
 |
||
| 9. Remove and individual well cover by inserting forceps in the corner, grasp firmly and peel off. | 10. | 11. |
Online Ordering
ProCrystal™ Protein Crystallization Covers are available online from the EMS Catalog. For ordering or product information, click here.