PEEK Polish

EMS Catalog #71833-10, 71833-11, 71833-12, 71833-13, 71833-14

PEEK Polish is a non-corrosive, non-irritant, non-oxidant product. It can be used in a variety of areas including the household, marine industries, and aeronautical industries and more. Not only does PEEK Polish clean surfaces, but it protects them as well.

What Does PEEK Polish Clean and Protect?

PEEK Polish cleans, polishes, and protects the following: Brass, silver, copper, gold, chrome, stainless steel, bronze, pewter, fiberglass, plexiglass, acrylic, aluminum, ceramic tile, marble, melamine, formica, arhorite, sterling silver, and more.

What Does PEEK Polish Remove?

PEEK Polish removes the following: Oxidation, tarnish, lime deposits, corrosion, crayon, grease, salt water stains, leaf marks, tree sap, bugs, tar, black marker, finger prints, graffiti, minor rust, ink, food stains, blood stains, smoke damage, water marks, wax build-up, gun powder residue, heat discoloration, and more.

Tips and Directions

1. Apply PEEK Polish sparingly. Do not let it dry,
2. Rub onto surface to be cleaned using a dry or damp cloth. For large areas, use a damp cloth. On large surface areas, PEEK Polish may also be applied using a low-speed buffer. On intricate surfaces, PEEK Polish may be applied using an old toothbrush wrapped in a dry or wet polishing cloth. On minor rust or stubborn deposits, PEEK Polish may be applied with a nylon scoring pad or bronze wool.
3. Using a circular motion, polish the surface until the polish has settled completely into the surface.

Product Information

PEEK Polish