Questions? 800-523-5874 | [email protected]
- Prepmaster™ Specimen Preparation Robot
- TEM Grids
- TEM Window Grids
- Omniprobe Nanomanipulation Systems
- K-kit Wet "Liquid" TEM Kit
- Specimen Mounts
- SEM Specimen Holders
- Index and Finder SEM Grids
- SEM for Forensics
- SEM Sample Preparation Station Materials
- Cryogenic Personal Protection Equipment
- Cryo Dewars & Flasks
- Cryogenic Grids & Accessories
- Cryogenic Vials & Racks
- Cooling Chambers & Ice Baths
- Prepmaster™ Specimen Preparation Robot
- Laboratory Microwave Ovens
- LYNX II Automated Tissue Processor
- EMS Poly III
- Microtomes
- Tissue Slicers
- Rapid Immersion Freezer
- Heaters & Chillers
- SEM Cooling Stage
- Glow Discharge Systems
- Sputter Coaters & Carbon Coaters
- Stages
- Freeze Dryers
- Critical Point Dryers
- Cryo-SEM Preparation System
- Specimen Transfer Systems
- Decontaminators
- Desiccators
- Centrifuges
- Dry Baths
- Stirrers, Hot Plates
- Vortexers & Magnetic Mixers
- Rotators & Rockers
- Ovens & Incubators
- Vibration Isolation
- Air Sampling
- Vacuum Pumps
EMS Technical Data Sheets
Orbital Shaker Attachment Accessory for the Roto-Shake Genie
EMS Catalog #71834-67
Instructions
- Remove magnetic platform from the Roto-Shake Genie (see Roto-Shake Genie manual).
- Place 3-D Orbital Shaker Attachment on the Roto-Shake Genie base, aligning the hex shaft with the hex on the pulley of the 3-D Orbital Shaker Attachment. Make sure the two feet are in contact with the Roto-Shake Genie base.
- Use the Roto-Shake Genie speed control knob for controlling the speed of your 3-D Orbital Shaker Attachment. Speed range is 10-70RPM.
- Place Non-Skid Mat on the 3-D Orbital Shaker platform. Do not use attachment without Non-Skid Mat.
- Place all loads centered on 3-D Orbital Shaker platform. Please note, platform capacity is 1 Kg (2.2 lb).
Product Information
Orbital Shaker Attachment Accessory for the Roto-Shake Genie