Questions? 800-523-5874 | [email protected]
- Prepmaster™ Specimen Preparation Robot
- TEM Grids
- TEM Window Grids
- Omniprobe Nanomanipulation Systems
- K-kit Wet "Liquid" TEM Kit
- Specimen Mounts
- SEM Specimen Holders
- Index and Finder SEM Grids
- SEM for Forensics
- SEM Sample Preparation Station Materials
- Cryogenic Personal Protection Equipment
- Cryo Dewars & Flasks
- Cryogenic Grids & Accessories
- Cryogenic Vials & Racks
- Cooling Chambers & Ice Baths
- Prepmaster™ Specimen Preparation Robot
- Laboratory Microwave Ovens
- LYNX II Automated Tissue Processor
- EMS Poly III
- Microtomes
- Tissue Slicers
- Rapid Immersion Freezer
- Heaters & Chillers
- SEM Cooling Stage
- Glow Discharge Systems
- Sputter Coaters & Carbon Coaters
- Stages
- Freeze Dryers
- Critical Point Dryers
- Cryo-SEM Preparation System
- Specimen Transfer Systems
- Decontaminators
- Desiccators
- Centrifuges
- Dry Baths
- Stirrers, Hot Plates
- Vortexers & Magnetic Mixers
- Rotators & Rockers
- Ovens & Incubators
- Vibration Isolation
- Air Sampling
- Vacuum Pumps
Mounting Option Selection Guide
For Calibration Specimens and Test Standards
Calibration Standards and Test Specimens are mounted to your choice of SEM specimen mount, AFM Disc, or Glass Slide with conductive cement. All test specimens and calibration standards are centrally mounted.
| Option | Description | |
| A | Cambridge, Philips, Camscan, B&L, Etec, Zeiss: Tapered end pin. Slotted head, 1/2" dia. (12.7 mm), pin 1/8" dia. (3.1 mm), 8 mm (H), Aluminum Standard (refer to EMS Cat. No. 75200) |  |
| B | AMRAY 1000/1200/1400: Head: 1/2" dia. (12.7 mm), pin 1/8" dia. (3.1 mm), Aluminum Standard (refer to EMS Cat. No. 75140) |  |
| C | JEOL, ISI, ABT, Topcon: Head 3/8" (9.5 mm), Height 3/8" (9.5 mm) Aluminum Standard (refer to EMS Cat. No. 75258) |  |
| D | JEOL, ISI: Surface: 5/8" dia. (15 mm), Height: 5/8" (16 mm), Aluminum Standard (refer to EMS Cat. No. 75400) |  |
| E | JEOL, ISI: Surface: 5/8" dia. (15 mm), height 5/8" (9.5 mm), Aluminum Standard (refer to EMS Cat. No. 75440) |  |
| F | Cambridge, Philips, Camscan, B&L, Etec, Zeiss: Tapered end pin. Slotted head 1/2" dia. (12.7 mm), pin 1/8" dia. (3.1 mm), 6 mm (H), Aluminum Standard (refer to EMS Cat. No. 75225-01) |  |
| G | Hitachi M4 Thread: Head: 5/8" dia. (15 mm), Height: 3/8" (9.5 mm), Aluminum Standard (refer to EMS Cat. No. 75635-10) |  |
| H | Hitachi M4 Thread: Head: 1" dia. (25 mm), Height: 3/8" (9.5 mm), Aluminum Standard (refer to EMS Cat. No. 75635-40) |  |
| J | JEOL, Aluminum Mount: Surface: 12.2 mm x 10 mm H (refer to EMS Cat. No. 75726) |  |
| K | Cambridge S-4, Mark II, S-410: Surface: 1 1/4" dia. (31.7 mm) x 3/16" H (6.4 mm) (refer to EMS Cat. No. 75050) |  |
| L | AMRAY 1400: Slotted Head 1/2" dia. (12.7 mm), pin 1/8" dia/ (3.1 mm), Aluminum Standard (refer to EMS Cat. No. 75170) |  |
| M | JEOL: Head: 1" dia. (25 mm), Height: 3/8" (9.5 mm), Aluminum Standard (refer to EMS Cat. No. 75696) |  |
| N | Leica, Cambridge, LEO, FEI, Philips, Zeiss, Camscan: Aluminum slotted head. Surface 1" (25.4 mm) x 1/2" (12.7 mm) H, pin 1/8" (3.1 mm) Dia (refer to EMS Cat. No. 75183) |  |
| P | Metal Specimen Disc for AFM: 12 mm (refer to EMS Cat. No. 75010-12) |  |
| Q | Glass Slide: 25 x 75 mm |  |