Questions? 800-523-5874 | [email protected]
- Prepmaster™ Specimen Preparation Robot
- TEM Grids
- TEM Window Grids
- Omniprobe Nanomanipulation Systems
- K-kit Wet "Liquid" TEM Kit
- Specimen Mounts
- SEM Specimen Holders
- Index and Finder SEM Grids
- SEM for Forensics
- SEM Sample Preparation Station Materials
- Cryogenic Personal Protection Equipment
- Cryo Dewars & Flasks
- Cryogenic Grids & Accessories
- Cryogenic Vials & Racks
- Cooling Chambers & Ice Baths
- Prepmaster™ Specimen Preparation Robot
- Laboratory Microwave Ovens
- LYNX II Automated Tissue Processor
- EMS Poly III
- Microtomes
- Tissue Slicers
- Rapid Immersion Freezer
- Heaters & Chillers
- SEM Cooling Stage
- Glow Discharge Systems
- Sputter Coaters & Carbon Coaters
- Stages
- Freeze Dryers
- Critical Point Dryers
- Cryo-SEM Preparation System
- Specimen Transfer Systems
- Decontaminators
- Desiccators
- Centrifuges
- Dry Baths
- Stirrers, Hot Plates
- Vortexers & Magnetic Mixers
- Rotators & Rockers
- Ovens & Incubators
- Vibration Isolation
- Air Sampling
- Vacuum Pumps
EMS Technical Tips
Blocking Solutions Application Instructions
Detailed information is provided on the package inserts.
Electron Microscopy
- On-Grid Labeling
Placing grids on top of drops of Blocking Solution arrayed on a sheet of Parafilm™ after they have been treated for aldehyde inactivation.
- Pre-embedding Labeling
Floating specimens in Blocking Solution, preferably on a rocking table.
Light Microscopy
- On-slide or -coverslip Labeling
Applying a few drops of Blocking Solution to cover the specimen.
- Bio Assays
Incubating specimens (e.g. immunoblot strips) in Blocking Solution on a rocking table in screw-cap sealed disposable tubes.
Additional Information
For additional information please see the Aurion Immunogold Newsletter and Protocol sections .