Questions? 800-523-5874 | [email protected]
- Prepmaster™ Specimen Preparation Robot
- TEM Grids
- TEM Window Grids
- Omniprobe Nanomanipulation Systems
- K-kit Wet "Liquid" TEM Kit
- Specimen Mounts
- SEM Specimen Holders
- Index and Finder SEM Grids
- SEM for Forensics
- SEM Sample Preparation Station Materials
- Cryogenic Personal Protection Equipment
- Cryo Dewars & Flasks
- Cryogenic Grids & Accessories
- Cryogenic Vials & Racks
- Cooling Chambers & Ice Baths
- Prepmaster™ Specimen Preparation Robot
- Laboratory Microwave Ovens
- LYNX II Automated Tissue Processor
- EMS Poly III
- Microtomes
- Tissue Slicers
- Rapid Immersion Freezer
- Heaters & Chillers
- SEM Cooling Stage
- Glow Discharge Systems
- Sputter Coaters & Carbon Coaters
- Stages
- Freeze Dryers
- Critical Point Dryers
- Cryo-SEM Preparation System
- Specimen Transfer Systems
- Decontaminators
- Desiccators
- Centrifuges
- Dry Baths
- Stirrers, Hot Plates
- Vortexers & Magnetic Mixers
- Rotators & Rockers
- Ovens & Incubators
- Vibration Isolation
- Air Sampling
- Vacuum Pumps
EMS Technical Data Sheets
Using The Davidson Marking System® Dyes
EMS Catalog #63021
- Shake tissue dye well before and throughout each use.
- Carefully blot tissue to remove excess moisture.
- Apply dye directly to desired portion of tissue using an applicator stick or brush. Do not apply excess dye as this will prolong drying time.
- Recap bottle promptly to prevent evaporation.
- Allow dye to dry completely (1-2 minutes). Once dry, the dye is permanently bonded to the tissue.
- No mordant is necessary, but can be used if desired.
- Once dry, the processing of the tissue can be performed.
Tissue Dying Examples
Online Ordering
The Davidson Marking System is available online from the EMS Catalog. For ordering or product information, click here.