EMS Technical Data Sheets


EMS Catalog #60529, 60530

About Alcotabs®

Alcotabs consists primarily of a homogeneous blend of sodium linear alkylaryl sulfonate, phosphates, carbonate and excipient ingredients added to aid in tabletting. Alcotabs are anionic in nature.

Why Alcotabs®

Alcotabs are critical-cleaning detergent tablets that are versatile in that they

Alcotabs is used to clean

Alcotabs is used to remove

Alcotabs is used to clean surfaces, such as

Alcotabs should be used according to the following cleaning method


  1. Submerge pipettes immediately after use in a 1% Alconox, Liquinox, or Tergazyme solution.
  2. Let soak in jar until enough pipettes accumulate to fill holder.
  3. Drop 2 Alcotabs into the rinser.
  4. Place the holder with pipettes into rinser.
  5. Alcotab will dissolve (in cold or warm water) and effervesce, producing a detergent solution that passes up and down through the bores and around the pipettes.
  6. Rinsing automatically follows after the tablet has dissolved.
  7. For analytical or tissue culture work, use distilled, deionized, or purified water for all or final rinse.

Cleaning Validation Methods

Test a parameter of rinse water before and after rinsing the cleaned surface, or test the clean surface. No significant change in the parameter indicates no detectable residue. Parameters measured include: conductivity, UV, TOC, HPLC, sodium concentration, phosphorus concentration, anionic surfactant concentration using inexpensive detergent water testing kits, surface tension, and surface analysis.

Technical Data

Physical Data Typical Value
pH of 1% solution 6.5
Flash point (degrees F) None
Phosphate content (as phosphorous) 3.9%
Organic carbon (% calculated w/w) 20%
Fragrance content 0%
Surface tension 1% solution (Dyne/cm) 32
Percent active ingredients 100%
Color White and cream flakes
Form Tablet
Solubility in water To 10% (w/w) at ambient temperature
Hard water effectiveness Highly effective
Biodegradability Biodegradable
Foam tendency High-foaming
Shelf life Three (3) years from the date of manufacture

Product Information