Questions? 800-523-5874 | [email protected]
- Prepmaster™ Specimen Preparation Robot
- TEM Grids
- TEM Window Grids
- Omniprobe Nanomanipulation Systems
- K-kit Wet "Liquid" TEM Kit
- Specimen Mounts
- SEM Specimen Holders
- Index and Finder SEM Grids
- SEM for Forensics
- SEM Sample Preparation Station Materials
- Cryogenic Personal Protection Equipment
- Cryo Dewars & Flasks
- Cryogenic Grids & Accessories
- Cryogenic Vials & Racks
- Cooling Chambers & Ice Baths
- Prepmaster™ Specimen Preparation Robot
- Laboratory Microwave Ovens
- LYNX II Automated Tissue Processor
- EMS Poly III
- Microtomes
- Tissue Slicers
- Rapid Immersion Freezer
- Heaters & Chillers
- SEM Cooling Stage
- Glow Discharge Systems
- Sputter Coaters & Carbon Coaters
- Stages
- Freeze Dryers
- Critical Point Dryers
- Cryo-SEM Preparation System
- Specimen Transfer Systems
- Decontaminators
- Desiccators
- Centrifuges
- Dry Baths
- Stirrers, Hot Plates
- Vortexers & Magnetic Mixers
- Rotators & Rockers
- Ovens & Incubators
- Vibration Isolation
- Air Sampling
- Vacuum Pumps
EMS Technical Data Sheets
SaniZide™ Germicidal Solution
EMS Catalog #70580-02, 70580-16, 70580-32, 70580-50
The Electron Microscopy Sciences SaniZide Plus is non-corrosive, EPA registered and fragrance-free. It contains no harmful bleaches, hydrogen peroxide or Phenol, and can be disposed of in mormal trash after following disposal directions. Furthermore, it is hospital-grade and ready-to-use on all hard and soft, non-porous surfaces.
Instructions
- Spray SaniZide onto the contaminated area, or wherever bacteria is present.
- We recommend the use of gloves while using SaniZide, although this is optional; we do recommend washing hands thoroughly after use.
- Be sure to keep the bottle at a distance from the eyes and face, avoiding breathing in the product.
- With a dry cloth; wipe the area clean.