Questions? 800-523-5874 | [email protected]
- Prepmaster™ Specimen Preparation Robot
- TEM Grids
- TEM Window Grids
- Omniprobe Nanomanipulation Systems
- K-kit Wet "Liquid" TEM Kit
- Specimen Mounts
- SEM Specimen Holders
- Index and Finder SEM Grids
- SEM for Forensics
- SEM Sample Preparation Station Materials
- Cryogenic Personal Protection Equipment
- Cryo Dewars & Flasks
- Cryogenic Grids & Accessories
- Cryogenic Vials & Racks
- Cooling Chambers & Ice Baths
- Prepmaster™ Specimen Preparation Robot
- Laboratory Microwave Ovens
- LYNX II Automated Tissue Processor
- EMS Poly III
- Microtomes
- Tissue Slicers
- Rapid Immersion Freezer
- Heaters & Chillers
- SEM Cooling Stage
- Glow Discharge Systems
- Sputter Coaters & Carbon Coaters
- Stages
- Freeze Dryers
- Critical Point Dryers
- Cryo-SEM Preparation System
- Specimen Transfer Systems
- Decontaminators
- Desiccators
- Centrifuges
- Dry Baths
- Stirrers, Hot Plates
- Vortexers & Magnetic Mixers
- Rotators & Rockers
- Ovens & Incubators
- Vibration Isolation
- Air Sampling
- Vacuum Pumps
EMS Technical Data Sheets
Multipurpose Electron Microscope Specimen Box Instructions
EMS # 71164
 1. Record card is stored underneath the box |
 2. When moving lid and plastic cover pieces only four holes are exposed at once |
|
3. The tweezers insertion slot grips the grid edge |
 4. Slot grids should best be gripped by curved tweezers. Mesh grids can be gripped by straight or curved tweezers. |
 |
|
| 5. MEM-96grid contain 96 grids (left) MEM-32grid-8block contain 32 grids and 8 blocks (middle). 6. Small semi-thin section can be stored by sliding into the block cavity (right). |
|
Online Ordering
Multipurpose Electron Microscope Specimen Boxes are available online from the EMS Catalog. For ordering or product information, click here.