Consists of esters or specially selected hydrocarbon fractions. They were developed for vapor-diffusion pump fluids:
- High purity, very low pressure, very stable
- Pressures lower than 10-7 torr obtainable
- No need for cold trap
- Good pumping speed
- No corrosive deposits or vapors
Physical Properties of Apiezon Oils
| |
Type C |
| Vapor Pressure,vtorr @20°C |
10-7 |
| Boiling Point,°C @ 1 torr |
225 |
| Flash Point (open cup)°F |
510 |
| Pour Point(ASTM) °F |
5 |
| Density, g/ml @ 20°C |
0.875 |
| @ 40°C |
0.863 |
| Viscosity, kinematic,cS @ 20°C |
283 |
| @ 50°C |
90 |
| @ 100°C |
10.6 |
| Coefficient of Expansion per °C over 20-30°C (ASTM) |
0.00069 |
| Thermal Conductivity Btu/in |
0.96 |
Invoil Oil C
Obtains the highest vacuum pressure (10-7 torr) of all of the oils without the need of a cold trap.