Questions? 800-523-5874 | [email protected]
- TEM Grids
- Prepmaster™ Specimen Preparation Robot
- TEM Window Grids
- Omniprobe Nanomanipulation Systems
- K-kit Wet "Liquid" TEM Kit
- Specimen Mounts
- SEM Specimen Holders
- Index and Finder SEM Grids
- SEM for Forensics
- SEM Sample Preparation Station Materials
- Cryogenic Personal Protection Equipment
- Cryo Dewars & Flasks
- Cryo-EM Grids & Grid Storage
- Cryogenic Vials & Racks
- Cryo-EM Vitrification Supplies
- Prepmaster™ Specimen Preparation Robot
- Laboratory Microwave Ovens
- LYNX II Automated Tissue Processor
- EMS Poly III
- Microtomes
- Tissue Slicers
- Heaters & Chillers
- SEM Cooling Stage
- Glow Discharge Systems
- Sputter Coaters & Carbon Coaters
- Stages
- Freeze Dryers
- Critical Point Dryers
- Cryo-SEM Preparation System
- Specimen Transfer Systems
- Decontaminators
- Desiccators
- Centrifuges
- Dry Baths
- Stirrers, Hot Plates
- Vortexers & Magnetic Mixers
- Rotators & Rockers
- Ovens & Incubators
- Vibration Isolation
- Air Sampling
- Vacuum Pumps
EMS Technical Data Sheets
EMS 5tth Tweezer, NC
EMS Catalog #78520-5TTH
Superalloy NC
General notes:
- - Ni-Cr-Mo superalloy
- - excellent strength from room temperature to 800 °C
- - very high shape retention
- - resistant to fatigue
- - fully non-magnetic (100%)
- - excellent corrosion resistance to most chemicals, salts and acids
- - typical applications include non-magnetic tools for electronic and watch industry applications and for laboratory and medical applications in aggressive chemical and extreme environments (aerospace, nuclear, marine)
Mechanical properties
| State | 50% cold reduction |
| Density | 8.4 g/cm3 |
| Hardness, Vickers | 260 HV |
| Tensile strength, ultimate | 925 MPa |
| Tensile strength, yield | 485 MPa |
| Elongation, break | 50% |
| Modulus of elasticity | 208 GPa |
Thermal properties
| Coef. of lin. therm expansion | 12.8 E-6/°C | 25°C-100°C |
| Coef. of lin. therm expansion | 13.4 E-6/°C | 25°C-300°C |
| Specific heat capacity | 0.41 J/(g∙K) | |
| Thermal conductivity | 10 W/(m∙K) | |
| Continuous use temperature | 600°C | |
| Max service temperature, air | 980°C |
Electrical properties
| Resistivity | 1.29 E-4 Ohm.cm |