Epoxy-Dye, 20g

Fluorescent dye for use in microscopy for cold mounting epoxies including EpoFix and Unimount to make cracks and pores visible.

Our dye is to be mixed into the mounting media in order to expose pores and cracks in the specimen under a microscope. EpoDye requires two filters in the microscope: One filter (400-440 nm) located between the light source and the specimen, and another filter (above 520 nm) located between the specimen and the eye piece.

Directions for use:

Mixing ratio:
Epoxy resin: 1 L
EpoDye: 5 g

SKU: 1245
Pack: 20 g