| |
ProScope T1 WiFi Microscope |
| Imager |
1.3 MP Color Sensor, Advanced H.264 compression technology for smooth video |
| Interface |
Wi-Fi |
| Magnification |
X50 (when standard lens is used) to X200 Approximate magnification when displayed on 14-inch monitor. |
| Dimensions |
10x8x6" (WxHxD)
254x203x152.4mm (without Lens) |
| Weight |
2 lbs (with battery, without Lens) |
| Power Consumption |
about 2.5W with standard lens |
| Length of cable |
N/A |
| Capture Button |
a) Freeze/Release
b) Still image capture
c) Push W/B after still image captured
d) QVGA/VGA exchange
e) Initialize for factory settings (Maintained after power supply is switched OFF) |
| Light Switch |
A-OFF-B (depends on the attached lens) A: OFF, or reflective LEDs
OFF:OFF B: Reflective LEDs, or Non Reflective LEDs |
| Camera Mount |
¼-20 UNC |
| Lens Release Button |
N/A |
| Video Preview |
High Definition 1280x720 still/video resolution |
| LED Control |
ON: The image is being transmitted
OFF: Power OFF or Battery is low Flash 0.5sec: The W/B is being changed Flash 1sec: The resolution is being changed Flash 2sec: Initialize for factory settings |
| Video Controls |
Manual White Balance, Automatic Gain Control |
| Still Capture |
High Definition 1280x720 still/video resolution |
| Video Capture |
High Definition 1280x720 still/video resolution |
| Driver |
N/A |
| Macintosh minimum system requirements |
N/A |
| Windows minimum system requirements |
N/A |
| Operating Temperature Range |
0°C~40°C |
| Storage Temperature Range |
-10°C~60°C |
| Other |
2 hour charge time to full power - 2 hour continuous operation time w/power saving mode |
| Warranty |
Two Year Warranty |