High Performance anti vibration platform for ultramicrotomes
- Active vibrations isolation table for performance microtomes
- Unique damped rolling diaphragm sub 2Hz frequency isolator removes up to 99 percent of vibrations
- Active 35 x 55 cm isolation area built into worktop sits on full size table underneath gives excellent stability and maximizes work area
- Stainless steel version meets stringent cleanliness requirements and is resistant to almost all forms of chemical attack
- Sound deadened table construction eliminates unwanted surface vibrations
The use of a built in active isolation table ensures complete isolation from vibrations while combining excellent stability. A top plate sits over the isolation table and has an isolation area of 35 x 55 cm built in for the microtome. Larger isolation areas are also available.The surrounding area of the worktop can thus be used for placing equipment on and for work without disturbing the microscope. The damped rolling diaphragm isolators have a low natural frequency of 2Hz which effectively isolates out vibrations above 6Hz, well below the frequencies at which typical building vibrations begin to occur. A wide range of option includes monitor arms, castors, stainless surface and silent air compressors.
Specifications
| Dimensions (LxWxD) |
780 x 780; 930 x 780; 1230 x 780 mm |
| Active Area (LxW) |
350 x 550; other sizes on request |
| Height |
780 mm |
| Load Capacity |
100 kg |
| Level Adjustment |
±15 mm |
| Surfaces |
white epoxy (stainless steel option) |
| Isolators |
4off damped rolling diaphragm active air isolators |
Isolation Performance
50Hz
100Hz |
97 percent
99 percent |
| Natural Frequency |
2Hz |
| Air Supply |
5 to 10 bar max via 6 mm airline |
| Working Temperature |
-20°C to 160°C |
| Shipping Weight |
90 kg |