Cryomold®, Round , Standard (4728) – Clear plastic with handling tab, measures 22 mm diameter x 5 mm deep
Cryomold®, Round , Biopsy (4730) – Clear plastic with handling tab, measures 15 mm diameter x 5 mm deep
Specimen Holder, Small (5807, 5808 amp; 5809) – Tissue-Tek®Cryo3® Used for mounting specimens with O.C.T. Compound, which will be frozen for sectioning. The small holder can accommodate a specimen size up to 25 mm. In addition, Tissue-Tek® Cryomolds™, standard and biopsy sizes, can be used to create a uniformly shaped flat surface to aid in trimming and sectioning.
Heat extractor, Standard (5811 & 5815)– Used to aid in rapidly freezing specimens for frozen sectioning technique. Using the heat extractor greatly reduces the rate of freezing specimens.
Cryobar Insert, 4-Cavity (5819) – These unique inserts enable flexibility in configuring the Cryo3 cryobar the meet the needs of each laboratory. Each insert is easily removed and replaced. The 4-cavity insert is used to accommodate the specimen holder post, which can be positioned directly into each well for freezing
Cryobar Insert, 4-Post (5820) – These unique inserts enable flexibility in configuring the Cryo3 cryobar the meet the needs of each laboratory. Each insert is easily removed and replaced. The 4-post insert is used to accommodate cryomolds, which can be positioned directly into each well for freezing. Cryomolds create a uniformly-shaped, that surface, which make trimming and sectioning easier and faster.
Utility Tray (5824) – This removable utility tray is positioned inside the Cryo chamber to the right of the Microtome. It provides ample space to accommodate miscellaneous items such as OCT Compound, disposable blades, brushes etc. The four holes may be used to store extra specimen holders for future use.
Waste Bottle (5825) – This 2-liter waste bottle is a plastic container which is positioned on the lower left front side of the Cryo3 instrument. The waste bottle is responsible for collecting residual moisture and debris generated from the defrost cycle or manual disinfection procedures.
Vacuum Filter Set (5826) – This set is used with Cryo3 models 5801 and 5802, consists of a microbial filter, a coarse debris filter and a corrugated vacuum hose. The filter is connected to a port located inside the chamber and the other end is connected to the blade holder port. When the vacuum system is on, debris and unwanted trimmings generated during sectioning are collected and contained in the filter. The filter is disposable and should be removed and replaced every 2 months or as often as necessary.
Vacuum Hose attachment (5827) – This vacuum hose attachment is used in conjunction with the vacuum filter set and can be attached to the corrugated vacuum hose, which connects the microbial filter. When the vacuum system is powered on, the hose attachment can be used to remove debris from the base of the chamber or other areas inside the instrument. Tissue-Tek® Cryo3® models 5801 & 5802 come standard with the vacuum debris removal system.
Ozone Lamp Assembly (5828) – The ozone lamp is responsible for generating ozone inside the chamber for the purpose of automatically disinfecting the cryo chamber. Ozone disinfection is standard in both CryO3 models, 5801 & 5802.The ozone lamp assembly should be replaced every 1000 cycles. The instrument software provides a reminder message when the useful life is nearing its end.
Please visit www.emsdiasum.com/microscopy for complete details.