The SC7620-CF carbon attachments are modular add-ons for our sputter coaters, allowing carbon fiber or carbon rod evaporation.
Each attachment uses the existing chamber and vacuum system of the sputter coater and is therefore a costeffective and efficient method for the evaporation of carbon for SEM applications. Note that the diameter of the top plate will vary according to the chamber size of the sputter coater onto which it is being fitted. We also offer free-standing carbon evaporators - see the and EMS 150T.
- Carbon rod or fiber
- Protection shutter
- Modular control electronics
- Interlocking for safe operation
- Three-year warranty
The EMS 7640-CF, EMS 7640-CR and EMS 7620-CF can be used in conjunction with the EMS 7620 (EMS 7620-CF), EMS 500X, EMS 550X, EMS 575X, EMS 650X and EMS 675X sputter coaters. Sometimes it is also possible to retrofit one of the above onto our older models, Please contact us for information on compatibility.
The attachment consists of two components - a free-standing power supply and a carbon fiber or carbon rod head to suit the chamber size of the sputter coater onto which it is to be fitted.
The power supply is switchable between 10V/100A (for carbon rod evaporation) and 20V/50A (for carbon fiber evaporation). A vacuum interlock is provided to ensure safe operation of the sputter coater and carbon accessory system. Out-gas and coat switches are provided for complete control of the evaporation sequence.