EMS 130 Specimen Punch 3 mm standard base

Prepare high-quality disk specimens from thin metal foils with the EMS 130 Specimen Punch. A precision ground punch and die plate eliminate specimen stress and distortion. For convenient handling, a spring-loaded return plunger keeps the disk specimen on the die plate surface.

Available with a wide or standard base and in three sizes.


Applicable Materials Metals
Material Thickness 100 µm max
Disk Size Available in standard 1 mm, 2.3 mm, and 3 mm sizes
Base Wide or Standard
w/wide base
4.0 in (102 mm) W x 3.1 in (79 mm) H x 4 in (102 mm) D
w/std base
1.0 in (25 mm) W x 2.5 in (64 mm) H x 1.1 in (28 mm) D
w/wide base
0.85 lb (387 g)
w/std base
0.25 lb (115 g)
Warranty One year


  1. Place the punch on a solid surface.
  2. Lift punch knob.
  3. Center area of sample interest under the punch.
  4. Lower punch to specimen surface and evenly apply pressure to punch specimen. It is permissible to use a small hammer to strike the knob.
  5. Pull up on knob to expose punched disk.
  6. Remove punched disk
    1. With tweezers or
    2. Turn punch sideways and allow disk to fall on lint-free paper
  7. Gently pull up on knob until specimen blank can be removed from the punch.
  8. Alignment fixture included for maximum yield and precise specimen location
  9. Solid construction for long term use without loss of precision
SKU: 50125-10-3
Pack: Each
Products specifications
Attribute name Attribute value
Warranty 12 months