Water from 21 jets constantly separates and washes both sides of prints. Agitating water engages and dilutes hypo, carrying it through the washer and out the opposite side. Holds 10 to 12 full-sized prints; all films to 11x14".
Plastic ruler with pink phosphorescent ink for fluorescent viewing and photographic work. Scale fluoresces with ultraviolet light. Use to measure nucleic acid mobility. 6" with 1/16 " increments and 15 cm with 1mm increments.
Extra soft rubber blades and a unique floating-action lower blade prevents any damage to the print surface. Suitable for both RC and fiber-based papers, the Print Squeegee handles prints up to 16x20" (40x50cm).
For air drying up to 20 RC prints in 15 min. Compact design with maximum ambient air circulation and prevents trapping of water between the print and the rack. Rack can be used with fiber-based paper. Capacity: 5- 11x14"; 10- 8x
For RC and fiber base papers, it holds one 11x14", two 8x10" or eight 4x5" prints at once on each drying surface. Quick drying, no over heating, and maximum uniformity of surface heat. Made from polished chrome Ferrotype metal.
5 minutes to perfect flat, and spotless RC prints or films. Built in air filter eliminates dust. It is thermostatically controlled for optimal drying temperatures. Accommodates four 11x14" prints. Measurements: 19½x14x7 1/4"(H)
Easily and accurately trim printed sheets containing prints in multiple sizes. Cutting head is has die-cast alloy construction. Self-sharpening hollow–ground tool-steel rotary blade. Dual steel rails for accurate, repeatable cuts.
Self-sharpening, high quality steel rotary cutting blade. Shielded blade assures safe operation with clear plate for alignment. Steel working surface, calibrated in inches, color coordinated in black and beige.
Super sharp cutting edge, using a standard single edge razor blade. Unobstructed view of the cutting process, safe, fully enclosed retractable blade, light weight (1lb), handles prints up to 14", measurements: 5½"x17½"
For precision cutting tough materials including hardboard but with a delicate touch for film paper and mount tissue. Rotary blade is hardened Sheffield carbon steel, spring-tensioned, and self-sharpening.
These sturdy dependable rotary cutters baseboard features 10mm squares for accurate placement of cutting material. With a self-sharpening Sheffield steel 2-way cutting blade that can handle almost any flexible material up to 2.0mm in thickness.
Mounts on the squaring arm of the cutter then slides to the desired position and locks in place. It is used when cutting sheet materials to identical lengths and can be used with either the Dualrail or the Monorail RotaTrim Cutters.