Porta-Wand® For Up To 8" (200mm ) Wafers, With ESD-Safe Flat Wafer Tip And 115V In-Stand Charger

The Porta-Wand® kit comes with a non-removable 9.6V NiMH rechargeable battery and in-stand charger. Easy push-button on/off control. Replaceable internal air filter is accessible from the front of the tool. Internal exhaust filter ensures better than Class 1 performance. Indicator Light flashes when battery needs to be recharged, and also turn on when proper vacuum has been established.

  • For up to 8" (200 mm) wafers, with ESD-safe flat wafer tip and 115V In-stand Charge

Specifications:

Battery Type: 9.6V NiMH, Rechargeable, Non-Removable
Charge Time: 2 hours
Continuous Run Time: 2-3 hours
Recharges: Up to 1000
Replacement: Factory Replaceable
Vacuum 15 to 20" of mercury (atmospheric pressure and elevation dependent)
Measurements Wand: 7 x 1.2 x 0.85" (178 x 30 x 21 mm)
Stand: 4.5 x 2 x 3.5" (114 x 51 x 98 mm)
Weight Porta-Wand: 5.44 ounces (154 grams)
Charger Stand: 10.5 ounces (298 grams)
Transformer: 16 ounces (454 grams)
Operating Temp 10°C to 45°C
Charger Power Requirements Supplied In-Stand Charger; Wall plug-in power supply 24 VDC @ 500ma. Barrel jack size 5.5 mm OD x 2.1 mm ID. Center pin positive.
SKU: 71928-02
Pack: Each
$2,641.50