Questions? 800-523-5874 | [email protected]
- Prepmaster™ Specimen Preparation Robot
- TEM Grids
- TEM Window Grids
- Omniprobe Nanomanipulation Systems
- K-kit Wet "Liquid" TEM Kit
- Specimen Mounts
- SEM Specimen Holders
- Index and Finder SEM Grids
- SEM for Forensics
- SEM Sample Preparation Station Materials
- Cryogenic Personal Protection Equipment
- Cryo Dewars & Flasks
- Cryogenic Grids & Accessories
- Cryogenic Vials & Racks
- Cooling Chambers & Ice Baths
- Prepmaster™ Specimen Preparation Robot
- Laboratory Microwave Ovens
- LYNX II Automated Tissue Processor
- EMS Poly III
- Microtomes
- Tissue Slicers
- Rapid Immersion Freezer
- Heaters & Chillers
- SEM Cooling Stage
- Glow Discharge Systems
- Sputter Coaters & Carbon Coaters
- Stages
- Freeze Dryers
- Critical Point Dryers
- Cryo-SEM Preparation System
- Specimen Transfer Systems
- Decontaminators
- Desiccators
- Centrifuges
- Dry Baths
- Stirrers, Hot Plates
- Vortexers & Magnetic Mixers
- Rotators & Rockers
- Ovens & Incubators
- Vibration Isolation
- Air Sampling
- Vacuum Pumps
Filters
Filter by attributes
- Material
- Voltage
Filter by manufacturer
Instrumentation
Sort by
Product Name
Ordering Info
Accessories
Lapping and polishing plates are for use with the ULTRAPOL Advance Lapping & Polishing Machine.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: 6230.1 | Description: Slurry containment tray | Pack: Each | Price: $291.50 |
Add to Quote:
|
|
ULTRAPOL Basic Manual Polisher
Manual polishing tool with speed control and a high torque motor. Configured for 100-220/240V operation. 0-500 RPM. Includes 8 inch (200mm) polishing system with speed control and solenoid-controlled coolant system.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: 1209.1 | Description: ULTRAPOL Basic Manual Polisher | Pack: Each | Price: $3,822.50 |
Add to Quote:
|
|
Ultratool Manual Polishing Tool
For manual polishing of supported connectorized or nonsupported bare fibers. Key to performance is a height adjust feature that is controlled by a fine pitch micrometer screw thread.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: 1101.6 | Description: Ultratool Kit | Pack: Each | Price: $1,665.50 |
Add to Quote:
|
|
NANOpol Bare Fiber Beveling System
Produces accurate polished bevels on bare optical fibers with an angle range of 20 to 180 degrees +/- 0.1 degree using the advanced positioning. NANOPOL Base unit with 4" o.d lapping plate and Fiber Polishing Micropostitioner.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: 1535.01 | Description: Quick-Release Mount | Pack: Each | Price: $424.00 |
Add to Quote:
|
|
Lapping and Polishing Fixtures
Accurately produces polished parallel, tapered, or critically oriented samples with minimal subsurface damage.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: 50150-45 | Description: Model 145 Lapping & Polishing Fixture | Pack: Each | Price: $1,632.50 |
Add to Quote:
|
|
|
| Cat #: 50150-50 | Description: Model 150 Lapping & Polishing Fixture | Pack: Each | Price: $3,731.00 |
Add to Quote:
|
|
Accessories and Spare Parts
Replace wear Ring, Stainless Steel with Tungsten Carbide Feet. Use with Models 155, 155D, and 155V.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: 50151-00 | Description: Vacuum Mounting Kit | Pack: Each | Price: $629.50 |
Add to Quote:
|
|
|
| Cat #: 50151-05 | Description: Replace Wear Ring | Pack: Each | Price: $468.50 |
Add to Quote:
|
|
|
| Cat #: 50151-06 | Description: Micrometer Dual Extension | Pack: Each | Price: $58.50 |
Add to Quote:
|
|
|
| Cat #: 50151-07 | Description: Base Extension Adapter | Pack: Each | Price: $251.00 |
Add to Quote:
|
|
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: 50155-01 | Description: Cutting Weight 7.5G | Pack: Each | Price: $44.50 |
Add to Quote:
|
|
|
| Cat #: 50155-02 | Description: Cutting Weight 15G | Pack: Each | Price: $49.00 |
Add to Quote:
|
|
|
| Cat #: 50155-03 | Description: Cutting Weight 20G | Pack: Each | Price: $44.50 |
Add to Quote:
|
|
|
| Cat #: 50155-04 | Description: Cutting Weight 40G | Pack: Each | Price: $68.00 |
Add to Quote:
|
|
|
| Cat #: 50155-05 | Description: Cutting Weight 100G | Pack: Each | Price: $88.00 |
Add to Quote:
|
|
|
| Cat #: 50155-06 | Description: Cutting Weight 150G | Pack: Each | Price: $91.00 |
Add to Quote:
|
|
|
| Cat #: 50155-07 | Description: Cutting Weight 200G | Pack: Each | Price: $95.50 |
Add to Quote:
|
|
|
| Cat #: 50155-09 | Description: Cutting Weight 400G | Pack: Each | Price: $112.50 |
Add to Quote:
|
|
|
| Cat #: 50155-10 | Description: Cutting Weight 600G | Pack: Each | Price: $128.50 |
Add to Quote:
|
|
Angled Mounting Blocks
1" (25mm) diameter stainless steel mounting blocks for lapping and polishing fixtures. For use with models 150, 151, and 155.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: 50153-01 | Description: .25 Angled Mounting Block | Pack: Each | Price: $83.50 |
Add to Quote:
|
|
|
| Cat #: 50153-02 | Description: .5 Angled Mounting Block | Pack: Each | Price: $83.50 |
Add to Quote:
|
|
|
| Cat #: 50153-03 | Description: 1 Angled Mounting Block | Pack: Each | Price: $83.50 |
Add to Quote:
|
|
|
| Cat #: 50153-04 | Description: 2 Angled Mounting Block | Pack: Each | Price: $83.50 |
Add to Quote:
|
|
|
| Cat #: 50153-05 | Description: 3 Angled Mounting Block | Pack: Each | Price: $83.50 |
Add to Quote:
|
|
|
| Cat #: 50153-06 | Description: 4 Angled Mounting Block | Pack: Each | Price: $83.50 |
Add to Quote:
|
|
|
| Cat #: 50153-07 | Description: 5 Angled Mounting Block | Pack: Each | Price: $83.50 |
Add to Quote:
|
|
|
| Cat #: 50153-20 | Description: 10 Angled Mounting Block | Pack: Each | Price: $83.50 |
Add to Quote:
|
|
|
| Cat #: 50153-21 | Description: 20 Angled Mounting Block | Pack: Each | Price: $112.50 |
Add to Quote:
|
|
|
| Cat #: 50153-22 | Description: 30 Angled Mounting Block | Pack: Each | Price: $118.50 |
Add to Quote:
|
|
|
| Cat #: 50153-23 | Description: 45 Angled Mounting Block | Pack: Each | Price: $137.50 |
Add to Quote:
|
|
|
| Cat #: 50153-24 | Description: 60 Angled Mounting Block | Pack: Each | Price: $126.00 |
Add to Quote:
|
|
|
| Cat #: 50153-25 | Description: 90 Angled Mounting Block | Pack: Each | Price: $126.00 |
Add to Quote:
|
|
Flat Mounting Blocks
1" (25mm) diameter stainless steel mounting blocks for lapping and polishing fixtures.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: 50152-01 | Description: 0.75" Flat Mounting Block | Pack: Each | Price: $53.00 |
Add to Quote:
|
|
|
| Cat #: 50152-02 | Description: 1" Flat Mounting Block | Pack: Each | Price: $55.00 |
Add to Quote:
|
|
|
| Cat #: 50152-03 | Description: 1.25" Flat Mounting Block | Pack: Each | Price: $56.00 |
Add to Quote:
|
|
|
| Cat #: 50152-04 | Description: 1.5" Flat Mounting Block | Pack: Each | Price: $60.50 |
Add to Quote:
|
|
|
| Cat #: 50152-05 | Description: 2" Flat Mounting Block | Pack: Each | Price: $70.00 |
Add to Quote:
|
|
Vacuum Mounting Bocks
Vacuum Mounting Bocks are for use with lapping and polishing fixture. Made of stainless steel.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: 50151-10 | Description: 2.125" Blank Pattern Vacuum Mounting Block | Pack: Each | Price: $142.00 |
Add to Quote:
|
|
|
| Cat #: 50151-11 | Description: 2.186" Blank Pattern Vacuum Mounting Block | Pack: Each | Price: $142.00 |
Add to Quote:
|
|
|
| Cat #: 50151-12 | Description: 2.125" Vacuum Pattern Vacuum Mounting Block | Pack: Each | Price: $291.50 |
Add to Quote:
|
|
Vertical Mounting Blocks
The blocks are used with the Model 155D Lapping and Polishing fixture for edge polishing 50mm mounted blocks. It accommodates vertically mounted samples.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: 50154-01 | Description: 4 Position Vertical Mounting Block | Pack: Each | Price: $123.00 |
Add to Quote:
|
|
|
| Cat #: 50154-02 | Description: 6 Position Vertical Mounting Block | Pack: Each | Price: $245.00 |
Add to Quote:
|
|
|
| Cat #: 50154-03 | Description: 6 Position Vertical Mounting Block For 12mm Rod Or 10mm Cube | Pack: Each | Price: $245.00 |
Add to Quote:
|
|
The Quick Jig
Versatile spring-loaded fixture for securing samples with pressure during mounting using adhesives, waxes, and epoxies. Fixture can be used at room temperature or on a hot plate. Scale on the pressure rod allows user to apply reproducible pressure.
Model 160 Chemical Polishing Fixture
PTFE construction provides suitable level of chemical resistance. Vacuum mounting method ensures simple and uniform sample mounting. Allows polishing samples up to 2 1/8" diameter, Suitable for bromine-methanol polishing of GaAs.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: 50164-60 | Description: Model 160 Chemical Polishing Fixture | Pack: Each | Price: $1,079.00 |
Add to Quote:
|
|
Twin Jet Electropolishing System
Developed for producing high quality thin foils. Solid PVC electrolyte tank, sample holder, thinning cell and tank base provide maximum resistance to corrosive electrolytes. Current automatically maintained.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: 55220-501B | Description: Twin Jet Electropolisher Model 501B | Pack: Each | Price: $17,490.00 |
Add to Quote:
|
|
|
| Cat #: 55222-32 | Description: Unipump Cyrogenic Pump | Pack: Each | Price: $2,565.00 |
Add to Quote:
|
|
|
| Cat #: 55222-40 | Description: Dewar Flask | Pack: Each | Price: $1,049.50 |
Add to Quote:
|
|
|
| Cat #: 55222-06 | Description: Graduated Grinding Jig | Pack: Each | Price: $816.00 |
Add to Quote:
|
|
Unidisc 3mm Disc Punch
Accessory for Twin Jet Electropolisher Model 501B. Designed to produce 3mm diameter discs for electropolishing, and subsequent TEM examination, from sample strips.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: 55230-08 | Description: Unidisc 3mm Disc Punch | Pack: Each | Price: $3,679.50 |
Add to Quote:
|
|
|
| Cat #: 55231-2P | Description: Replacement Standard Punch, 3mm | Pack: Each | Price: $1,749.00 |
Add to Quote:
|
|
Wire Saw
Gentle mechanical method for cutting material using diamond impregnated wire blade or plain wire blade with an abrasive slurry. Suitible for fragile crystals or substrates with delicate layers.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: 55232-1 | Description: 1mm Disc Die Set | Pack: Each | Price: $3,679.50 |
Add to Quote:
|
|
|
| Cat #: 55232-2 | Description: 2mm Disc Die Set | Pack: Each | Price: $3,679.50 |
Add to Quote:
|
|
Reactive Ion Etcher – Model RIE 2000
Reactive Ion Etcher is a table-top plasma chemistry reactor designed to provide anisotropic etch plasma technology at a moderate cost. This simple-to-operate instrument can perform repeatable plasma chemical reactions with a minimum of automation.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: 55321-2D | Description: Replacement Standard Die, 3mm | Pack: Each | Price: $0.00 |
Add to Quote:
|
|
|
| Cat #: 55320-01 | Description: Reactive Ion Etcher- Model Rie 2000 110 Volt (No Pump, No Recirculator) | Pack: Each | Price: $39,247.50 |
Add to Quote:
|
|
|
| Cat #: 55320-02 | Description: Reactive Ion Etcher- Model Rie 2000 220 Volt (No Pump, No Recirculator) | Pack: Each | Price: $39,247.50 |
Add to Quote:
|
|
|
| Cat #: 55320-03 | Description: Reactive Ion Etcher- Model Rie 2000 110 Volt With Turbo Pump (No Recirculator) | Pack: Each | Price: $51,141.00 |
Add to Quote:
|
|
|
| Cat #: 55320-04 | Description: Reactive Ion Etcher- Model Rie 2000 220 Volt With Turbo Pump (No Recirculator) | Pack: Each | Price: $51,141.00 |
Add to Quote:
|
|
|
| Cat #: 55320-05 | Description: Solid State Cooling Systems Chiller | Pack: Each | Price: $4,197.50 |
Add to Quote:
|
|
Diamond Band Saw
Designed for medium precision with efficient cutting of hard and brittle materials. Rugged enough for soft metals and polymer. Adjustable blade guide. Incl: 1 x Diamond Band Saw Blade, 3 x Blade Guides.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: 50182-01 | Description: Diamond Band Saw Blade | Pack: Each | Price: $140.00 |
Add to Quote:
|
|
|
| Cat #: 50182-05 | Description: Top Friction Belt | Pack: Each | Price: $21.00 |
Add to Quote:
|
|
|
| Cat #: 50182-06 | Description: Bottom Friction Belt | Pack: Each | Price: $21.00 |
Add to Quote:
|
|
|
| Cat #: 50182-08 | Description: Blade Guide | Pack: Each | Price: $12.50 |
Add to Quote:
|
|
|
| Cat #: 50182-10 | Description: Lower Adjustment Screw | Pack: Each | Price: $7.50 |
Add to Quote:
|
|
|
| Cat #: 50182-11 | Description: Locking Nuts | Pack: Each | Price: $4.00 |
Add to Quote:
|
|
|
| Cat #: 50182-14 | Description: Plastic Arm | Pack: Each | Price: $38.00 |
Add to Quote:
|
|
|
| Cat #: 50182-15 | Description: Lower Shaft Assembly | Pack: Each | Price: $35.00 |
Add to Quote:
|
|
|
| Cat #: 50182-16 | Description: Lower Drive Wheel | Pack: Each | Price: $38.00 |
Add to Quote:
|
|
|
| Cat #: 50182-17 | Description: Upper Drive Wheel | Pack: Each | Price: $38.00 |
Add to Quote:
|
|
|
| Cat #: 50182-18 | Description: Lower Drive Wheel Bushing Assembly | Pack: Each | Price: $33.00 |
Add to Quote:
|
|
|
| Cat #: 50182-65 | Description: Model 865 Diamond Band Saw | Pack: Each | Price: $1,457.50 |
Add to Quote:
|
|
| Cat # | Description | MSDS | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|---|
| Cat #: 50378-01 | Description: Water Soluble Coolant | MSDS | Pack: 1 qt | Price: $30.50 |
Add to Quote:
|
|
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: 50379-01 | Description: Sic Dressing Stick | Pack: Each | Price: $19.00 |
Add to Quote:
|
|