Questions? 800-523-5874 | [email protected]
- Prepmaster™ Specimen Preparation Robot
- TEM Grids
- TEM Window Grids
- Omniprobe Nanomanipulation Systems
- K-kit Wet "Liquid" TEM Kit
- Specimen Mounts
- SEM Specimen Holders
- Index and Finder SEM Grids
- SEM for Forensics
- SEM Sample Preparation Station Materials
- Cryogenic Personal Protection Equipment
- Cryo Dewars & Flasks
- Cryogenic Grids & Accessories
- Cryogenic Vials & Racks
- Cooling Chambers & Ice Baths
- Prepmaster™ Specimen Preparation Robot
- Laboratory Microwave Ovens
- LYNX II Automated Tissue Processor
- EMS Poly III
- Microtomes
- Tissue Slicers
- Rapid Immersion Freezer
- Heaters & Chillers
- SEM Cooling Stage
- Glow Discharge Systems
- Sputter Coaters & Carbon Coaters
- Stages
- Freeze Dryers
- Critical Point Dryers
- Cryo-SEM Preparation System
- Specimen Transfer Systems
- Decontaminators
- Desiccators
- Centrifuges
- Dry Baths
- Stirrers, Hot Plates
- Vortexers & Magnetic Mixers
- Rotators & Rockers
- Ovens & Incubators
- Vibration Isolation
- Air Sampling
- Vacuum Pumps
Filters
Filter by attributes
- Hazard
- Ice
- Overnight Shipping Only
- Shelf Life
Filter by manufacturer
Buffers
All of our ready-to-use buffers are:
- Conveniently packaged.
- Prepared fresh for each order.
- Economical and time-saving.
- Desired pH should be specified when ordering.
The buffer is a vehicle for the fixative and requires certain properties:
- To maintain constant pH during the time of the fixation. The pH of the fixative in EM is adjusted using the buffer system chosen; e.g. range 6.5-8.0.
- The ionic constitution to prevent the extraction of cellular components, or the deposition of precipitates of fixative chemicals.
Sort by
Product Name
Ordering Info
R-UNIVERSAL Epitope Recovery Buffer (10x stock)
The EMS Universal Buffer may be used in any heat-induced epitope recovery system. In the Antigen Retriever (62700 Series), it guarantees the highest rate of success in recovering epitope for any antibody.
| Cat # | Description | MSDS | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|---|
| Cat #: 62719-10 | Description: R-Universal Epitope Recovery Buffer (10x stock) | MSDS | Pack: 125 mL | Price: $178.00 |
Add to Quote:
|
|
|
| Cat #: 62719-20 | Description: R-Universal Epitope Recovery Buffer (10x stock) | MSDS | Pack: 500 mL | Price: $280.00 |
Add to Quote:
|
|
|
| Cat #: 62719-30 | Description: T-Universal Epitope Recovery Buffer 10x Stock | MSDS | Pack: 125 mL | Price: $90.00 |
Add to Quote:
|
|
|
| Cat #: 62719-35 | Description: T-Universal Epitope Recovery Buffer 10x Stock | MSDS | Pack: 500 mL | Price: $127.00 |
Add to Quote:
|
|
|
| Cat #: 62719-40 | Description: U-Universal Epitope Recovery Buffer 10x Stock | MSDS | Pack: 125 mL | Price: $116.50 |
Add to Quote:
|
|
|
| Cat #: 62719-45 | Description: U-Universal Epitope Recovery Buffer 10x Stock | MSDS | Pack: 500 mL | Price: $132.50 |
Add to Quote:
|
|
|
| Cat #: 62719-50 | Description: L-Universal Epitope Recovery Buffer 10x Stock | MSDS | Pack: 125 mL | Price: $88.00 |
Add to Quote:
|
|
|
| Cat #: 62719-55 | Description: L-Universal Epitope Recovery Buffer 10x Stock | MSDS | Pack: 500 mL | Price: $144.00 |
Add to Quote:
|
|
|
| Cat #: 62719-60 | Description: H-Universal Epitope Recovery Buffer 10x Stock | MSDS | Pack: 125 mL | Price: $88.00 |
Add to Quote:
|
|
|
| Cat #: 62719-65 | Description: H-Universal Epitope Recovery Buffer 10x Stock | MSDS | Pack: 500 mL | Price: $144.00 |
Add to Quote:
|
|
|
| Cat #: 62719-70 | Description: Epitope Recovery Set | MSDS | Pack: Set | Price: $456.00 |
Add to Quote:
|
|
Section Block
A new class of blocking solutions based on chemically modified and fragmented ultra-pure casein. Effectively reduces unwanted binding of primary antibody and conjugates you use to charged surface of the slide and tissue section.
| Storage | Cat # | Description | MSDS | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|---|---|
| Storage:4-8°C | Cat #: 62710 | Description: Section Block | MSDS | Pack: 50 mL | Price: $85.00 |
Add to Quote:
|
|
|
| Storage:4-8°C | Cat #: 62711 | Description: Section Block | MSDS | Pack: 125 mL | Price: $191.00 |
Add to Quote:
|
|
|
| Storage:4-8°C | Cat #: 62712 | Description: Section Block | MSDS | Pack: 500 mL | Price: $715.50 |
Add to Quote:
|
|
Sodium Cacodylate Buffer
Prepared from Sodium Cacodylate Trihydrate. Ideal for maintaining a constant pH use during fixation, our buffers are prepared fresh for each order and conveniently packaged.
| Storage | Cat # | Description | MSDS | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|---|---|
| Storage:2-8°C | Cat #: 11650 | Description: Sodium Cacodylate Buffer, 0.2M, pH 7.4 | MSDS | Pack: 225 mL | Price: $36.00 |
Add to Quote:
|
|
|
| Storage:2-8°C | Cat #: 11652 | Description: Sodium Cacodylate Buffer, 0.2M, pH 7.4 | MSDS | Pack: 500 mL | Price: $51.00 |
Add to Quote:
|
|
|
| Storage:2-8°C | Cat #: 11653 | Description: Sodium Cacodylate Buffer, 0.2M, pH 7.4 | MSDS | Pack: 1 L | Price: $100.50 |
Add to Quote:
|
|
|
| Storage:2-8°C | Cat #: 11653-1G | Description: Sodium Cacodylate Buffer, 0.2M, pH 7.4 | MSDS | Pack: 1 gal | Price: $253.50 |
Add to Quote:
|
|
|
| Storage:2-8°C | Cat #: 11654 | Description: Sodium Cacodylate Buffer, 0.4M, pH 7.2 | MSDS | Pack: 500 mL | Price: $74.00 |
Add to Quote:
|
|
|
| Storage:2-8°C | Cat #: 11655 | Description: Sodium Cacodylate Buffer, 0.4M, pH 7.2 | MSDS | Pack: 1 L | Price: $132.50 |
Add to Quote:
|
|
|
| Storage:2-8°C | Cat #: 11655-1G | Description: Sodium Cacodylate Buffer, 0.4M, pH 7.2 | MSDS | Pack: 1 gal | Price: $253.50 |
Add to Quote:
|
|
Sorensen's Phosphate Buffer
A Phosphate buffered mixed salt prepared from sodium phosphate monobasic and sodium phosphate dibasic. Osmolarity is 300 mosmols.
| Storage | Cat # | Description | MSDS | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|---|---|
| Storage:2-8°C | Cat #: 11600-05 | Description: Sorensen's Phosphate Buffer, 0.2M, pH 7.2 | MSDS | Pack: 500 mL | Price: $27.50 |
Add to Quote:
|
|
|
| Storage:2-8°C | Cat #: 11600-10 | Description: Sorensons Phosphate Buffer, 0.2M, pH 7.2 | MSDS | Pack: 1 L | Price: $38.00 |
Add to Quote:
|
|
|
| Storage:2-8°C | Cat #: 11600-10-4L | Description: Sorensen's Phosphate Buffer, 0.2M, pH 7.2 | MSDS | Pack: 4 L | Price: $128.50 |
Add to Quote:
|
|
|
| Storage:2-8°C | Cat #: 11600-10-5G | Description: Sorensen's Phosphate Buffer, 0.2M, pH 7.2 | MSDS | Pack: 5 gal | Price: $337.00 |
Add to Quote:
|
|
|
| Storage:2-8°C | Cat #: 11601-10 | Description: Sorensen’s Phosphate Buffer, 0.2M, pH 7.4 | MSDS | Pack: 1 L | Price: $39.00 |
Add to Quote:
|
|
|
| Storage:2-8°C | Cat #: 11601-10-4L | Description: Sorensen’s Phosphate Buffer, 0.2M, pH 7.4 | MSDS | Pack: 4 L | Price: $129.50 |
Add to Quote:
|
|
|
| Storage:2-8°C | Cat #: 11601-10-5G | Description: Sorensen’s Phosphate Buffer, 0.2M, pH 7.4 | MSDS | Pack: 5 gal | Price: $337.00 |
Add to Quote:
|
|
|
| Storage:2-8°C | Cat #: 11682-05 | Description: Sorensen's Phosphate Buffer, 0.15M, pH 7.4 | MSDS | Pack: 500 mL | Price: $32.00 |
Add to Quote:
|
|
|
| Storage:2-8°C | Cat #: 11682-10 | Description: Sorensen's Phosphate Buffer, 0.15M, pH 7.4 | MSDS | Pack: 1 L | Price: $39.00 |
Add to Quote:
|
|
|
| Storage:2-8°C | Cat #: 11682-10-4L | Description: Sorensen’s Phosphate Buffer, 0.15M, pH 7.4 | Pack: 4 L | Price: $134.50 |
Add to Quote:
|
|
||
| Storage:2-8°C | Cat #: 11682-10-5G | Description: Sorensen’s Phosphate Buffer, 0.15M, pH 7.4 | Pack: 5 gal | Price: $345.50 |
Add to Quote:
|
|
Sym-Collidine Buffer Kit
A very stable buffer, used with Osmium tetroxide; provides excellent fixation. Set consists of: 1 amp 5.34ml Sym Collidine and 1 amp 9.0 ml of 2N HCl.
| Storage | Cat # | Description | MSDS | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|---|---|
| Storage:RT | Cat #: 11500 | Description: Sym-Collidine Buffer Kit | MSDS | Pack: Kit | Price: $38.00 |
Add to Quote:
|
|
|
| Storage:RT | Cat #: 11510 | Description: Sym-Collidine Buffer Kit | MSDS | Pack: 5 Pack | Price: $130.50 |
Add to Quote:
|
|
Sym-Collidine, Reagent
Sym-Collidine is used in combination with osmium tetroxide to provide excellent fixation and stable buffering. pH does not change when distilled water or osmium tetroxide solution is added.
| Storage | Cat # | Description | MSDS | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|---|---|
| Storage:RT | Cat #: 11520 | Description: Sym-Collidine, Reagent | MSDS | Pack: 100 mL | Price: $223.50 |
Add to Quote:
|
|
Tris, (Hydroxymethyl) Aminomethane Maleate
Ideal for maintaining a constant pH use during fixation, our buffers are prepared fresh for each order and conveniently packaged. Shecify pH when ordering.
| Storage | Cat # | Description | MSDS | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|---|---|
| Storage:2-8°C | Cat #: 11730 | Description: Tris Maleate Buffer 0.2M pH Range 6.4-8.0 | MSDS | Pack: 250 mL | Price: $27.50 |
Add to Quote:
|
|
|
| Storage:2-8°C | Cat #: 11740 | Description: Tris Maleate Buffer 0.2M pH Range 6.4-8.0 | MSDS | Pack: 500 mL | Price: $37.00 |
Add to Quote:
|
|
|
| Storage:2-8°C | Cat #: 11740-1L | Description: Tris Maleate Buffer 0.2M pH Range 6.4-8.0 | MSDS | Pack: 1 L | Price: $58.50 |
Add to Quote:
|
|
|
| Storage:2-8°C | Cat #: 11740-1G | Description: Tris Maleate Buffer 0.2M pH Range 6.4-8.0 | MSDS | Pack: 1 gal | Price: $204.50 |
Add to Quote:
|
|
|
| Storage:RT | Cat #: 11730-05 | Description: Tris Buffer 0.2M pH 8.0 | MSDS | Pack: 250 mL | Price: $27.50 |
Add to Quote:
|
|
|
| Storage:RT | Cat #: 11730-06 | Description: Tris Buffer 0.2M pH 8.0 | MSDS | Pack: 500 mL | Price: $37.00 |
Add to Quote:
|
|
|
| Storage:RT | Cat #: 11730-06-1L | Description: Tris Buffer 0.2M pH 8.0 | MSDS | Pack: 1 L | Price: $58.50 |
Add to Quote:
|
|
|
| Storage:RT | Cat #: 11730-06-1G | Description: Tris Buffer 0.2M pH 8.0 | MSDS | Pack: 1 gal | Price: $204.50 |
Add to Quote:
|
|
|
| Storage:2-8°C | Cat #: 11730-08 | Description: Tris Buffered Saline pH 7.4 | MSDS | Pack: 250 mL | Price: $27.50 |
Add to Quote:
|
|
|
| Storage:2-8°C | Cat #: 11730-09 | Description: Tris Buffered Saline pH 7.4 | MSDS | Pack: 500 mL | Price: $37.00 |
Add to Quote:
|
|
|
| Storage:2-8°C | Cat #: 11730-09-1L | Description: Tris Buffered Saline pH 7.4 | Pack: 1 L | Price: $58.50 |
Add to Quote:
|
|
||
| Storage:2-8°C | Cat #: 11730-09-1G | Description: Tris Buffered Saline pH 7.4 | Pack: 1 gal | Price: $204.50 |
Add to Quote:
|
|
||
| Storage:2-8°C | Cat #: 11730-12 | Description: Tris-HCL Buffer 1M pH Range 6-8 | MSDS | Pack: 250 mL | Price: $27.50 |
Add to Quote:
|
|
|
| Storage:2-8°C | Cat #: 11730-15 | Description: Tris-HCL Buffer 1M pH Range 6-8 | MSDS | Pack: 500 mL | Price: $37.00 |
Add to Quote:
|
|
|
| Storage:2-8°C | Cat #: 11730-15-1L | Description: Tris-HCL Buffer 1M pH Range 6-8 | Pack: 1 L | Price: $58.50 |
Add to Quote:
|
|
||
| Storage:2-8°C | Cat #: 11730-15-1G | Description: Tris-HCL Buffer 1M pH Range 6-8 | Pack: 1 gal | Price: $204.50 |
Add to Quote:
|
|
||
| Storage:2-8°C | Cat #: 11730-20 | Description: Tris HCL Buffer pH Range 7.2-9.0 | MSDS | Pack: 250 mL | Price: $27.50 |
Add to Quote:
|
|
|
| Storage:2-8°C | Cat #: 11730-25 | Description: Tris HCL Buffer pH Range 7.2-9.0 | MSDS | Pack: 500 mL | Price: $37.00 |
Add to Quote:
|
|
|
| Storage:2-8°C | Cat #: 11730-25-1L | Description: Tris HCL Buffer pH Range 7.2-9.0 | Pack: 1 L | Price: $58.50 |
Add to Quote:
|
|
||
| Storage:2-8°C | Cat #: 11730-25-1G | Description: Tris HCL Buffer pH Range 7.2-9.0 | Pack: 1 gal | Price: $204.50 |
Add to Quote:
|
|
Tris Buffer pH 10.0 (10x)
This buffer is intended for heat-induced antigen retriever on formalin-fixed paraffin-embedded (FFPE) tissue sections prior to application of antibodies. On FFPE tissue the buffer improves accessibility of antibodies to tissue antigens.
| Storage | Cat # | Description | MSDS | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|---|---|
| Storage:2-8°C | Cat #: 64142-11 | Description: Tris Buffer pH 10.0 (10x) | MSDS | Pack: 100 mL | Price: $91.00 |
Add to Quote:
|
|
|
| Storage:2-8°C | Cat #: 64142-12 | Description: Tris Buffer pH 10.0 (10x) | MSDS | Pack: 1000 mL | Price: $151.50 |
Add to Quote:
|
|
|
| Storage:2-8°C | Cat #: 64142-12-1G | Description: Tris Buffer pH 10.0 (10x) | MSDS | Pack: 1 gal | Price: $408.00 |
Add to Quote:
|
|
Universal Immunoassay Buffer™, 10x
Immunoassay buffer is used as a 1X in immunoassays (immunofluorescence, IHC, ELISA, WB) as a washing buffer. Can be used as a dilution buffer for antibodies. Does not contain carrier proteins, phosphate, sodium azide or mercury.
| Storage | Cat # | Description | MSDS | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|---|---|
| Storage:RT | Cat #: 25880-01 | Description: Universal Immunoassay Buffer™, 10X | MSDS | Pack: 100 mL | Price: $63.50 |
Add to Quote:
|
|
|
| Storage:RT | Cat #: 25880-10 | Description: Universal Immunoassay Buffer™, 10X | MSDS | Pack: 1 L | Price: $178.00 |
Add to Quote:
|
|
Universal Antibody Dilution Buffer™
For dilution of antibodies in all immunoassays, including immunofluorescence, IHC, ELISA, WB. Does not contain mammalian proteins, phosphate, sodium azide, or mercury preservatives. Diluted antibodies can be stored at 2–8 degree C for several weeks.
| Storage | Cat # | Description | MSDS | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|---|---|
| Storage:2-8°C | Cat #: 25885-01 | Description: Universal Antibody Dilution Buffer™ | MSDS | Pack: 100 mL | Price: $70.00 |
Add to Quote:
|
|
|
| Storage:2-8°C | Cat #: 25885-05 | Description: Universal Antibody Dilution Buffer™ | MSDS | Pack: 500 mL | Price: $191.00 |
Add to Quote:
|
|