Questions? 800-523-5874 | [email protected]
- TEM Grids
- Prepmaster™ Specimen Preparation Robot
- TEM Window Grids
- Omniprobe Nanomanipulation Systems
- K-kit Wet "Liquid" TEM Kit
- Specimen Mounts
- SEM Specimen Holders
- Index and Finder SEM Grids
- SEM for Forensics
- SEM Sample Preparation Station Materials
- Cryogenic Personal Protection Equipment
- Cryo Dewars & Flasks
- Cryo-EM Grids & Grid Storage
- Cryogenic Vials & Racks
- Cryo-EM Vitrification Supplies
- Prepmaster™ Specimen Preparation Robot
- Laboratory Microwave Ovens
- LYNX II Automated Tissue Processor
- EMS Poly III
- Microtomes
- Tissue Slicers
- Heaters & Chillers
- SEM Cooling Stage
- Glow Discharge Systems
- Sputter Coaters & Carbon Coaters
- Stages
- Freeze Dryers
- Critical Point Dryers
- Cryo-SEM Preparation System
- Specimen Transfer Systems
- Decontaminators
- Desiccators
- Centrifuges
- Dry Baths
- Stirrers, Hot Plates
- Vortexers & Magnetic Mixers
- Rotators & Rockers
- Ovens & Incubators
- Vibration Isolation
- Air Sampling
- Vacuum Pumps
Filters
Filter by attributes
- Color
- Hazard
- Shipping
- Storing
- Overnight Shipping Only
- Shelf Life
Filter by supplier
Embedding Media Kits
Technical Tips: General Tips for Embedding Media Kits
- Epoxy Resins: Problems, Causes, and Solutions
- Storage of Embedding Resin Mixtures
- Preparation of Embedding Mixtures
- DMP-30 and DMAE VS. BDMA
*Please note that wherever DMP-30 is listed as the accelerator in our embedding media kits you have the option to use BDMA in place of it. BDMA is less viscous, has a longer shelf life, and offers better penetration (it should be noted, however, that in order to achieve the optimum results when using BDMA in place of DMP-30 you must vary the amount. DMP-30: 1.5-2%; BDMA: 2.5-3%).
Sort by
Product Name
Ordering Info
Histocryl® Resin
Histocryl acrylic resin specially formulated for light microscopy. Water clear. It is hydrophilic (polar). Permits use of routine staining techniques without prior removal or etching.
| Storage | Cat # | Description | MSDS | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|---|---|
| Storage:RT | Cat #: 14390 | Description: Histocryl Resin Kit | MSDS | Pack: Kit | Price: $280.00 |
Add to Quote:
|
|
Lowicryl®, Embedding Kit
Highly cross-linked acrylate-based embedding resins for a range of embedding conditions. These resins provide low viscosity at low temps. Photopolymerized by long wavelength (360nm) ultraviolet light.
| Storage | Cat # | Description | MSDS | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|---|---|
| Storage:RT | Cat #: 14330 | Description: Lowicryl® K4M Kit | MSDS | Pack: Kit | Price: $642.00 |
Add to Quote:
|
|
|
| Storage:RT | Cat #: 14340 | Description: Lowicryl® Hm20 Kit | MSDS | Pack: Kit | Price: $708.00 |
Add to Quote:
|
|
|
| Storage:RT | Cat #: 14350 | Description: Lowicryl® K11M Kit | MSDS | Pack: Kit | Price: $715.00 |
Add to Quote:
|
|
|
| Storage:RT | Cat #: 14360 | Description: Lowicryl® Hm23 Kit | MSDS | Pack: Kit | Price: $722.00 |
Add to Quote:
|
|
Lowicryl® MonoStep™ Single Component Embedding Media
MonoStep Single Component Embedding Media. Pre-mixed, ready to use resin, saves you time and minimizes chemical contact. MonoStep Lowicryl is ideal for use in immunohistochemistry and immunolabeling. Store at room temperature
| Storage | Cat # | Description | MSDS | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|---|---|
| Storage:RT | Cat #: 14335 | Description: Lowicryl® K4M Polar Monostep™ | MSDS | Pack: 225 g | Price: $335.00 |
Add to Quote:
|
|
|
| Storage:RT | Cat #: 14345 | Description: Lowicryl® Hm-20 Polar Monostep™ | MSDS | Pack: 225 g | Price: $350.00 |
Add to Quote:
|
|
(SPURR), Low Viscosity, Embedding Kit
Provides excellent penetration for embedding biological tissues and rapid infiltration. Easy to prepare. Hardness is adjusted by changing proportion of DER 736. Consists of: 450ml NSA, 225ml ERL 4221, 225ml DER 736, 25ml DMAE
| Storage | Cat # | Description | MSDS | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|---|---|
| Storage:RT | Cat #: 14300 | Description: Low Viscosity Embedding Kit | MSDS | Pack: Kit | Price: $96.00 |
Add to Quote:
|
|
UltraBed Kit
One-step-preparation of low viscosity embedding uses equal amount of A and B. Readily infiltrates into specimen and polymerizes to a clear, hard block overnight at 60 degrees C. Shipped as non-hazardous. Kit comes with 100 ml each.
| Storage | Cat # | Description | MSDS | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|---|---|
| Storage:RT | Cat #: 14310 | Description: Ultrabed Low Viscosity Kit | MSDS | Pack: Kit | Price: $320.00 |
Add to Quote:
|
|
Methyl Methacrylate/Butyl Methacrylate
Mixture of Butyl and Methyl Methacrylate. Can be UV cured in cold or heat cured and removed from sections with solvent (acetone) before staining. 225 ml Methyl Methacrylate, 225 ml Butyl Methacrylate, 15 gm Benzoyl Peroxide Paste
| Storage | Cat # | Description | MSDS | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|---|---|
| Storage:RT | Cat #: 14520 | Description: Mthyl Methacrylate/Butyl Methacrylatee Embedding Kit | MSDS | Pack: Kit | Price: $52.00 |
Add to Quote:
|
|
Micro-Bed Resin
Supplied as a single component-ready to use pre-mixed resin. Micro-Bed can be polymerized in either EMS embedding capsules or gelatin capsules by heat (55-65°C) or UV (365nm) light at low temperatures (-10 to 20°C) for 72 hours.
| Storage | Cat # | Description | MSDS | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|---|---|
| Storage:0-5°C | Cat #: 14210 | Description: Micro-Bed Embedding Resin | MSDS | Pack: 500 mL | Price: $135.00 |
Add to Quote:
|
|
Polyester wax
Asynthetic polyester wax with a very low melting point (37°C) is used as a ribboning embedding medium. Low mp reduces tissue hardening, shrinkage, and eliminates the need for infiltration ovens. 2 microns can be cut at 10 to 22°C
| Storage | Cat # | Description | MSDS | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|---|---|
| Storage:RT | Cat #: 19312 | Description: Polyester Wax | MSDS | Pack: 500 g | Price: $225.00 |
Add to Quote:
|
|
Quetol 651, NSA Kit
NSA A water miscible epoxy resin used for light and electron microscopy. Its low viscosity permits easy infiltration and embedding, and yields light-colored blocks. Kit: 225ml Quetol 651, 450ml NMA, 450ml NSA, 50ml DMP-30.
| Storage | Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|---|
| Storage:0-5°C | Cat #: 14640 | Description: Quetol 651/NSA Embedding Kit | Pack: Kit | Price: $196.00 |
Add to Quote:
|
|
Styrene Monomer, Polyester Resin Kit
Very low viscosity monomeric styrene penetrates rapidly into tissues. Soluble in ethanol and acetone. Infiltration and embedding can be done by styrene alone. Polymerize by UV or heat within 2-3 days without benzoyl peroxide.
| Storage | Cat # | Description | MSDS | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|---|---|
| Storage:RT | Cat #: 14650 | Description: Styrene Monomer, Polyester Resin Kit | MSDS | Pack: Kit | Price: $52.00 |
Add to Quote:
|
|
EUKITT® EMS 4400 LB
EUKITT 4400 LB is a single-component resin that polymerizes under UV light. It is used for embedding and preparing of thin ground sections. Thin ground sections for medical and technical applications can be produced.
| Storage | Cat # | Description | MSDS | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|---|---|
| Storage:RT | Cat #: 15320-40 | Description: EUKITT EMS 4400 LB | MSDS | Pack: 500 mL | Price: $280.00 |
Add to Quote:
|
|
Technovit® 9100
Technovit 9100 is a plastic embedding medium based on methyl methacrylate that hardens at low temperature. Use for the embedding of mineralized tissues with extensive possibilities of staining for LM. Complete kit.
| Storage | Cat # | Description | MSDS | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|---|---|
| Storage:RT | Cat #: 14655 | Description: Technovit® H9100 Kit | MSDS | Pack: Kit | Price: $360.00 |
Add to Quote:
|
|
Technovit® Glycol Methacrylate 7100 and 8100 Embedding Kits
Glycol Methacrylate embedding kits convenient to use, offers best embedding results. Improved morphology. Polymerization temperature never exceeds 40°C. Initiator is prepackaged.
| Storage | Cat # | Description | MSDS | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|---|---|
| Storage:RT | Cat #: 14653 | Description: Technovit® H7100 Gma | MSDS | Pack: Kit | Price: $230.00 |
Add to Quote:
|
|
|
| Storage:RT | Cat #: 14654 | Description: Technovit® H8100-Gma | MSDS | Pack: Kit | Price: $360.00 |
Add to Quote:
|
|
|
| Storage:RT | Cat #: 14654-25 | Description: Technovit® 8100 Histo Set | Pack: Kit | Price: $3,752.00 |
Add to Quote:
|
|
||
| Storage:RT | Cat #: 14654-26 | Description: Technovit® 7100 Histo Set | Pack: Kit | Price: $3,850.00 |
Add to Quote:
|
|
Technovit® 3040 – Mounting Medium
Fast curing methyl methacrylate-based resin forms a firm, durable bond between Technovit and the specimen. Consists of powder and liquid that are easily mixed.
| Storage | Cat # | Description | MSDS | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|---|---|
| Storage: | Cat #: 14652 | Description: Technovit® 3040 Kit | MSDS | Pack: Kit | Price: $69.00 |
Add to Quote:
|
|
|
| Storage:RT | Cat #: 14652-10L | Description: Technovit® 3040 Large Kit | MSDS | Pack: Kit | Price: $180.00 |
Add to Quote:
|
|
Technovit® 4000
Low Shrinkage, fast curing, cold polymerizing, three-component resin based on modified polyester in powder, syrup I, and syrup II form. Optimum grinding, and polishing. Consists of:
| Storage | Cat # | Description | MSDS | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|---|---|
| Storage:RT | Cat #: 14656-03 | Description: Technovit® 4000 Large | MSDS | Pack: Kit | Price: $345.00 |
Add to Quote:
|
|
Technovit® Polymerization Device
The unique EMS Technovit Polymerization Device (TPD) is a blue light curing device for all Technovit resins. The unit has built-in reflectors for homogenous curing of the blocks. The TPD fits up to 9 embedding molds and is generously sized.
| Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|
| Cat #: 14653-22 | Description: Technovit Polymerization Device (TPD) | Pack: Each | Price: $1,375.00 |
Add to Quote:
|
|
Technovit® Embedding Molds
Embedding mold composed of new material with a special shape for easy-to-cut specimens. PTFE for easy removal of 10 plastic blocks when using the Histobloc system.
| Storage | Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|---|
| Storage:RT | Cat #: 14654-30 | Description: Histoform Q | Pack: Each | Price: $975.00 |
Add to Quote:
|
|
|
| Storage:RT | Cat #: 14654-35 | Description: Histoform S | Pack: Each | Price: $705.00 |
Add to Quote:
|
|
Technovit® Histobloc®
To fix elastic Technovit 7100 embedded specimen on a universal stable mount, to insure optimum clamping and cutting. Clamps into all rotary microtomes without adapter. Inexpensive disposable
| Storage | Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|---|
| Storage:RT | Cat #: 14654-60 | Description: HistoBloc for “S” and “Q” | Pack: 100 Pack | Price: $88.00 |
Add to Quote:
|
|
| Storage | Cat # | Description | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|---|
| Storage:RT | Cat #: 14653-11 | Description: Microtome Knife Holder 17CM | Pack: Each | Price: $1,298.00 |
Add to Quote:
|
|
|
| Storage:RT | Cat #: 14653-13 | Description: Histo Knife H | Pack: 50 Pack | Price: $260.00 |
Add to Quote:
|
|
|
| Storage:RT | Cat #: 14653-15 | Description: Mounting Press | Pack: Each | Price: $853.00 |
Add to Quote:
|
|
|
| Storage:RT | Cat #: 14653-16 | Description: PE –Foils 75x25mm | Pack: 200 Pack | Price: $10.00 |
Add to Quote:
|
|
|
| Storage:RT | Cat #: 14653-17 | Description: Insert For Specimen Holder M | Pack: Each | Price: $362.00 |
Add to Quote:
|
|
|
| Storage:RT | Cat #: 14653-18 | Description: Specimen Holder H | Pack: Each | Price: $1,694.00 |
Add to Quote:
|
|
|
| Storage:RT | Cat #: 14653-19 | Description: Embedding Mold 25mm | Pack: 3 Pack | Price: $120.00 |
Add to Quote:
|
|
|
| Storage:RT | Cat #: 14653-20 | Description: Insert for Embedding Form 25mm | Pack: 3 Pack | Price: $63.00 |
Add to Quote:
|
|
Acrylic Plastic Casting
Thermosetting acrylic-polymer plastic with excellent clarity. Place object in a mold, mix and pour. Hard in an hour and object is firmly embedded in clear, stable plastic. Can be polished with soft cloth to high gloss.
| Storage | Cat # | Description | MSDS | Pack | Price | Quote | Quantity | |
|---|---|---|---|---|---|---|---|---|
| Storage:RT | Cat #: 24210-01 | Description: Acrylic Plastic Casting 1Pt | MSDS | Pack: Kit | Price: $56.50 |
Add to Quote:
|
|
|
| Storage:RT | Cat #: 24210-02 | Description: Acrylic Plastic Casting 1Qt | MSDS | Pack: Kit | Price: $84.00 |
Add to Quote:
|
|
|
| Storage:RT | Cat #: 24210-08 | Description: Acrylic Plastic Casting 1Gal | MSDS | Pack: Kit | Price: $210.00 |
Add to Quote:
|
|