Conductive, silver-based polymer used for thick film coatings where liquid silver is not an option. Cured it has a very high Tg (glass transition temp) 153°F to prevent blocking. Superior adhesion to polyester film.
Easy-to-apply resistance coating provides high lubricity, conductivity, and excellent release properties to non-conductive substrates. Made from dispersion of colloidal graphite in isopropanol. Forms a thin film adherent layer.
An easy to use fast drying graphite spray to coat small samples. It produces a very flat, thin, and uniform graphite film. Its service temperature is up to 204°C. It's electrical resistance is 1.2 kohm/sq" at 1 ml thickness.
High temperature conductive paint withstands ambient temperatures of over 500°F. Remains flexible from –40 to over 500°F. Cures at room temperature. Good adhesion to substrate. Excellent oxidation resistance. Ready to use.
Clear Lacquer base. Thick base – Ideal for non-flowing required. Easily applied with micro spatula or wooden toothpick. Particle size ranging 0.4-1 um, 80% are less than 1 um. Cure in 16 to 20 hours at room temperature or 30 minutes at 125 – 150 deg C.
This strong, water-based adhesive has an excellent electrical and thermal conductivity. Dries quickly to an ultra smooth finish in just 15 minutes and is non-hazardous. Water/oil resistant, anti cracking, blocks UVA and has no measurable VOCs.
Electrically carbon conductive cement and thinner for scanning electron microscope sample mounting. After cement dries SEM viewing is possible of conductive samples. Non-conductive specimens need to be coated with carbon or metal.
Thermoplastic adhesive for mounting powders and small particles for SEM. Does not contain solvents and is stable in high vacuum. It is not sticky at room temperature but becomes adhesive at 40°C and melts at 120°C.
Epoxy Gold Paste is a gold-filled conductive bonding, exhibiting high electrical conductivity and bond strength. Used in preference to silver-epoxy to avoid silver migration problems, or when a higher signal is required.
With one part adhesive it is not for permanent use. Use for testing and temporary work where a high signal is required from the adhesive. Gold content is ~75%, in organic binders and a solvent.
We offer a broad line of electrically and thermally conductive materials, which provide solutions to a variety of electrical, electronic, and thermal design problems throughout the laboratories and industries.
Epo-Tek H20E is a two component, 100% solid silver-filled epoxy system, silver-resin paste and liquid hardener, mixing ration is 1:1. High thermal conductivity suited for high temp applications (300 – 400°C).
Nodified version of Epo-TekH20E. Is a highly reliable, two component, silver-filled epoxy with a smooth, thixotropic consistency (mixing ratio 1:1). Offers high electrical conductivity and short curing cycles.
Epo-Tek H22 is a two component, silver-filled epoxy system. Mixing ratio of silver resin paste and liquid hardener is 100:4.5. Pot life 16 hours, and shelf life is 6 months at RT.
Eliminates the need for hazardous xylene or xylene substitutes as a clearing agent in histology and cytology laboratories. With Clearium, simply do away with the final step of clearing and coverslip directly from absolute isopropyl alcohol.
Butyl acetate and acrylic resin mixture for manual coverslipping directly from d-limonene based clearants. Clear seal with drying time is less than 24 hours. Refractive index is 1.42 - Viscosity is 90 cPs.
Colorless, non resinous, water miscible mounting medium for permanent transparent mounts. Use like Canada Balsam for most materials that are not stained, calciferous material, or thin tissue. Mount live or preserved specimens.